Roland MC-4 Manuel du propriétaire Page 63

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 180
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 62
63
Patch Edit
Patch/Sample Mode
Amp Env (Amp Envelope)
These parameters specify the depth of the amp envelope (change in volume over time) and the shape of the envelope itself.
Parameter
Value Description
A-Env V-Curve
(Amp Envelope
Velocity Curve)
FIX, 1–7 Curve by which pad playing dynamics will affect the volume of the tone
If you specify “FIX,” the volume of the tone will remain the same regardless of your playing dynamics.
A-Env V-Sens
(Amp Envelope
Velocity Sensitivity)
-63– +63 Amount by which pad playing dynamics will affect the volume of the tone
Specify a positive (+) value if you want the volume of the tone to increase as you play more strongly.
Specify a negative (-) value if you want the volume to decrease.
A-Env T1 V-Sens
(Amp Envelope
Time 1 Velocity
Sensitivity)
-63– +63 Amount by which T1 (time) of the Amp envelope will change in response to your playing dynamics
Increasing this value will produce a greater change between softly played and strongly played notes.
Specify a positive (+) value if you want the T1 time to speed up, or a negative (-) value if you want it
to slow down.
A-Env T4 V-Sens
(Amp Envelope
Time 4 Velocity
Sensitivity)
-63– +63 Amount by which T4 (time) of the Amp envelope will change in response to the speed at which you
release the pad (key-off velocity)
Increasing this value will produce a greater change between slowly released and quickly released
notes. Specify a positive (+) value if you want the T4 time to speed up, or a negative (-) value if you
want it to slow down.
A-Env Time KF
(Amp Envelope
Time Keyfollow)
-100– +100 Amount by which Amp envelope times (T2–T4) will be affected by the pad you play
Higher settings for this value will produce a greater change relative to the C4 key. Positive (+) values
will cause the times to become shorter as you play toward the right. Conversely, negative (-) values
will cause the times to become longer.
A-Env Time1–4 #
(Amp Envelope
Time 1–4)
0–127 Amp envelope times (T1–T4)
Higher settings of these values will lengthen the time over which the next volume level of the enve-
lope is reached. (For example, T2 is the time over which the level changes from L1 to L2.)
* Realtime modify knob [A] adjusts Time 1, knob [D] adjusts Time 3, and knob [R] adjusts Time 4.
A-Env Level1–3 #
(Amp Envelope
Level 1–3)
0–127 Amp envelope levels (L1–L3)
Specifies the change in volume at each point, relative to the reference level.
* Realtime modify knob [S] adjusts Level 3.
T1 T2 T3 T4
L3
L1
L2
Level
key is pressed
key is released
Time
1234567
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
MC-909_Ref_e.book 63 ページ 2005年6月28日 火曜日 午後2時53分
Vue de la page 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 179 180

Commentaires sur ces manuels

Pas de commentaire