Roland MC-4 Manuel du propriétaire télécharger pdf (Page 39)

Recording a pattern

Pattern Mode

Realtime Erase

During realtime recording, you can use the velocity pads or the

realtime modify knobs to erase data.

Select the part from which you want to erase data.

Select a part in the same way as described in “Selecting the part

to record” (p. 38).

During recording, press [F2 (Erase)].

The realtime erase window will appear.

fig.1-**

In the Erase Type field, choose the type of data that

you want to erase.

* If you want to erase knob data, operate the corresponding knob of the

panel to specify that data.

Erase the data.

• When “NOTE” has been selected, hold down two notes on the

velocity pads or on an external MIDI keyboard, and all note

messages within the region defined by those two notes will be

erased while you continue holding down the notes.

• For other types of data, the data selected by Erase Type will be

erased while you continue holding down [F5 (Erase)].

To return to recording mode, press [F5 (Close)] or

[EXIT].

Recording Cancel

Here’s how you can cancel the entire content of a recording, and

return to the recording-standby state.

During recording, press [F5 (Rec Cancel)].

A message will ask for confirmation.

To carry out Recording Cancel, press [F6 (Execute)].

All the data that has been recorded from the time you pressed

[PLAY] to start recording until you pressed [F5 (Rec Cancel)]

will be discarded.

* To cancel, press [F5 (Cancel)].

TR-REC

This is a recording method in which the velocity pads of the MC-909

are used as timing scale buttons to enter note messages.

You can input/delete notes by pressing the velocity pads to switch

them between lit/extinguished. This is an easy way to specify the

timing at which notes are to be placed.

* This method cannot be used to record data other than note messages

(e.g., control changes produced by operating the realtime modify

knobs).

Standby screen

fig.1-30

Function buttons

ALL

All data

NOTE

Note messages

P-AFT

Polyphonic aftertouch

C-AFT

Channel aftertouch

Control change

Program change

BEND

Bend data

SYSEX

System exclusive data

BPM

Tempo change data

MUTE

Mute on/off

EXCEPT NOTE

All data other than note messages

Parameter

Range Explanation

Rec Beat

2/4–7/4, 5/8–

7/8, 9/8, 12/8,

9/16, 11/16,

13/16, 15/16,

17/16, 19/16

Pattern time signature

* Can be specified only for

an empty pattern.

Rec Measure

Length

1–998 Pattern length

* An already-recorded pat-

tern can be made longer,

but not shorter. To shorten

it, use the pattern edit De-

lete Measure (p. 45) to de-

lete one or more measures.

Rec Velocity REAL, 1–127 Volume (velocity) of the

notes that you input from the

velocity pads.

If this is set to REAL, your

playing strength on the

pads will determine the ve-

locity that is input.

[F1 (Patch List)] Choose a patch/rhythm set from a list (p. 55).

[F3 (Mixer)]

(Part Mixer)

Display the Mixer screen (p. 33).

[F6 (BPM/Click)] Set the tempo, and turn the metronome on/

off (p. 25).

MC-909_Ref_e.book 39 ページ２００５年６月２８日　火曜日　午後２時５３分

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Roland MC-4 Manuel du propriétaire Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Roland MC-4