Roland E-300 Manuel d'utilisateur télécharger pdf (Page 28)

Part 1

1-8 Vacuum Cleaner Connection

NOTICE

Use a vacuum cleaner that lets you adjust the amount of suction and is equipped with an overload protector.

Always allow a minimum gap of 30 cm (11-13/16 in.) on the side where the vacuum hose exits. The vacuum

hose must have sufficient space in which to move. When the vacuum hose cannot move smoothly, it can cause

malfunctions or errors in operation.

When the fitting diameters do not match or when the vacuum duct cannot be inserted into the suction opening of the

vacuum cleaner, use strong commercial tape (cloth or electrical) to join the fittings.

Vacuum up cutting chips and grit during an on-going cutting operation, using the vacuum adapter, and commercial vacuum cleaner.

Before you install the vacuum adapter

1) Switch on the power and press the [ENTER] key. (The head moves inward and to the left.)

2) Press the [ ] key to move the head leftward and toward the front.

3) Switch off the power.

Commercial

vacuum cleaner

Vacuum

adapter

Rear

Tighten

Rail

Pass the vacuum hose over

the rail to the rear panel of

the unit.

Tighten

Attach the vacuum

adapter.

Secure the vacuum

hose in place.

Vacuum duct

32 mm (1-5/16 in.)

Commercial

vacuum cleaner

Leave about 20 cm

(about 8 in.) of open

space behind the unit.

Use a commercially available brush

to remove metal cuttings.

Attempting to use a

vacuum cleaner to take

up metal cuttings may

cause fire in thevacuum

cleaner.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 64 65

Commentaires sur ces manuels

Pas de commentaire

Roland E-300 Manuel d'utilisateur Page 28

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Roland E-300