Roland GT-PRO Manuel du propriétaire télécharger pdf (Page 63)

Chapter 6 Using Pedals to Control the Effects

Chapter 6

Setting the Operation of the External

EXP Pedal (EXP1, 2 Function)

This applies the setting determining the function of the EXP

pedals connected to the EXP PEDAL 1 and EXP PEDAL 2

jacks as global settings for the entire GT-PRO.

fig.06-0050

1. Press [SYSTEM].

2. Press PARAMETER [ ] [ ] so that “EXP1 Func”

or “EXP2 Func” is displayed.

fig.06-0060d

3. Use the PATCH/VALUE dial to select the external EXP

pedal function.

4. Repeat Steps 2 and 3 as needed.

5. Press [EXIT] to return to the Play screen.

Amp Ctl2 On/Off

Switches the AMP CTL 2 on and off.

MANUAL On/Off

Switches the Manual Mode (p. 85) on and

off.

TUNER On/Off

Switches the TUNER/BYPASS on and off.

Master BPM (TAP)

Used for tap input of the Master BPM.

Delay Time (TAP)

Used for tap input of the delay time.

MIDI Start/Stop

Controls the Start/Stop of external MIDI de-

vices (such as sequencers).

MMC Play/Stop

Controls the Play/Stop of external MIDI de-

vices (such as hard disk recorders).

Patch Level Inc1

Increases the patch volume level by 10 units.

Patch Level Inc2

Increases the patch volume level by 20 units.

Patch Level Dec1

Decreases the patch volume level by 10

units.

Patch Level Dec2

Decreases the patch volume level by 20

units.

Hold Dly Rec/Dub

Switches Hold recording (dubbing) on and

off when “Hold” (p. 32) is selected for the

delay type.

Hold Dly Stop

When “Hold” is selected for the delay type, the

performance is instantly stopped.

Solo A&B On/Off

Switches the preamp SOLO, for both chan-

nel A and B, on and off.

* If one of the two channels is off, both will be

turned on.

Patch Num. Inc

Switches to the next higher patch number in

the same bank as the currently selected

patch.

Patch Num. Dec

Switches to the next lower patch number in

the same bank as the currently selected

patch.

Patch Bank Inc

Switches to the next higher bank number.

Patch Bank Dec

Switches to the next lower bank number.

Value Explanation

Auto

(EXP1 Func only)

The pedal normally is used as a “foot vol-

ume” pedal. When Pedal Wah (p. 36) or

Pedal Bend (p. 47) is switched on, the EXP

pedal then automatically functions as a

“pedal wah” or “pedal bend” pedal.

When Pedal Wah and Pedal Bend are switched off, this automatical-

ly functions as a “foot volume” pedal.

Assignable

The pedal is used as the controller set in As-

sign (p. 66) for each patch.

Foot Volume

The pedal functions as a “foot volume” pedal.

Patch Level

The pedal is used as the patch level controller.

Pedal Wah

The pedal is used as a “pedal wah” pedal

when Pedal Wah is switched on.

Pedal Bend

The pedal is used as a “pedal bend” pedal

when Pedal Bend is switched on.

132

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 163 164

Commentaires sur ces manuels

Pas de commentaire

Roland GT-PRO Manuel du propriétaire Page 63

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical supplémentaire Roland GT-PRO