Roland V-Synth GT Manuel d'utilisateur télécharger pdf (Page 203)

203

System Mode (Settings Common to All Modes)

fig.08-11.eps_50

Controller (Controller-related Settings)

Keyboard

Parameter

Value Description

Keyboard Sens

(Keyboard Sensitivity)

Light

Sets the keyboard sensitivity to “light.”

Medium Sets the keyboard sensitivity to “normal.”

Heavy Sets the keyboard sensitivity to “heavy.”

Keyboard Velocity

REAL, 1–127

Specifies the velocity value that will be transmitted

when you play the keyboard. If you want actual key-

board velocity to be transmitted, set this to “REAL.” If

you want a fixed velocity value to be transmitted re-

gardless of how you play, specify the desired value

(1–127).

Aftertouch Sens

(Aftertouch Sensitivity)

0–200

Specifies the Aftertouch sensitivity. Higher values will

allow Aftertouch to be applied more easily. Normally

you will leave this at “100.”

Local Sw (Local Switch)

OFF, ON

The Local Switch determines whether the internal

sound generator is disconnected (OFF) from the con-

troller section (keyboard, pitch bend/modulation le-

ver, knobs, buttons, Time Trip Pad, D Beam

controller, pedal, and so on); or not disconnected

(ON). Normally this is left “ON,” but if you wish to

use the V-Synth GT’s keyboard and controllers to con-

trol only external sound modules, set it to “OFF.”

V-Synth-GT_e.book 203 ページ２００７年４月９日　月曜日　午後１時４６分

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 247 248

Pas de commentaire

Roland V-Synth GT Manuel d'utilisateur Page 203