Roland CM-500 Spécifications télécharger pdf (Page 53)

5 About the Blades and Materials

5-1 Blade and Material Combinations

This section indicates the proper cutting conditions for various types of materials, as well as blade life-span. Cutting conditions

and blade life vary according to the hardness of the material and the usage environment. Making the settings for the conditions

described below does not automatically guarantee attractive cutting results in all situations. Before performing actual cutting, be

sure to carry out a cutting test and make any necessary adjustments (see “3-3 Adjusting the Blade Force and Cutting Speed”). If

the material is not cut through completely even when the blade force is increased by 50 to 60 gf more than the blade force values

shown below, it means that the useful life of the blade has ended. Replace with a new blade.

* The values for life-span are intended to serve as a general guide when cutting materials of identical type.

* When you are cutting small text (character height of 3 mm for alphanumeric characters or more), ZEC-U3017 can produce more

attractive cutting results than other blades.

* Use the included blade under conditions equivalent to those for the ZEC-U5025.

Material

General Signage Vinyl

Fluorescent Vinyl

Reflective Vinyl

Rubber material for

sandblasting stencil

Signage vinyl (material

thickness 0.1 mm or

less)

Blade

ZEC-U1005

ZEC-U5025

ZEC-U1715

ZEC-U3017

Blade offset

0.25 mm (0.01 in.)

0.175 mm (0.007

in.)

Blade force

50 to 150 gf

30 to 100 gf

120 to 200 gf

100 to 200 gf

100 gf or less

Speed

85 cm/sec.

20 cm/sec.

85 cm/sec.

Life of a blade

(General guide)

8000 m

4000 m

Varies according

to material type

4000 m

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 79 80

Commentaires sur ces manuels

Pas de commentaire

Roland CM-500 Spécifications Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel d'enregistrement Roland CM-500