Roland CD-2u Manuel du propriétaire Page 8

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 7
8
USING THE UNIT SAFELY
001-60
To completely turn off power to the unit, pull out the
plug from the outlet
Even with the power switch turned off, this unit is not
completely separated from its main source of power.
When the power needs to be completely turned off,
turn off the power switch on the unit, then pull out
the plug from the outlet. For this reason, the outlet
into which you choose to connect the power cord’s
plug should be one that is within easy reach and
readily accessible.
....................................................................................
001-70
Concerning the Auto Off function
The power to this unit will be turned off automatically
after a predetermined amount of time has passed
since it was last used for playing music, or its buttons
or controls were operated (Auto Off function). If you
do not want the power to be turned off automatically,
disengage the Auto Off function (Page 23).
....................................................................................
002c
Do not disassemble or modify by yourself
Do not open (or modify in any way) the unit or its AC
adaptor.
....................................................................................
003
Do not repair or replace parts by yourself
Do not attempt to repair the unit, or replace parts
within it (except when this manual provides specific
instructions directing you to do so). Refer all servicing
to your retailer, the nearest Roland Service Center, or
an authorized Roland distributor, as listed on the
“Information” page.
....................................................................................
004
Do not use or store in the following types of locations
Subject to temperature extremes (e.g., direct sunlight
in an enclosed vehicle, near a heating duct, on top of
heat-generating equipment); or are
Damp (e.g., baths, washrooms, on wet floors); or
are
Exposed to steam or smoke; or are
Subject to salt exposure; or are
Humid; or are
Exposed to rain; or are
Dusty or sandy; or are
Subject to high levels of vibration and shakiness.
...................................................................................
005a-edit
Use only stand that is recommended
This unit should be used only with a stand that is
recommended by Roland.
...................................................................................
006a-edit
Do not place in a location that is unstable
When using the unit with a stand recommended by
Roland, the rack or stand must be carefully placed so
it is level and sure to remain stable. If not using a rack
or stand, you still need to make sure that any location
you choose for placing the unit provides a level
surface that will properly support the unit, and keep it
from wobbling.
...................................................................................
006b-edit
Precautions regarding placement of this unit on a stand
Be sure to follow the instructions in the Owner’s
Manual carefully when placing this unit on a stand
(Page 19).
If it is not set up properly, you risk creating an
unstable situation which could lead to the unit falling
or the stand toppling, and may result in injury.
...................................................................................
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic
animals or pets.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet.
The symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
CD-2u_SD-2u_e.book 8 ページ 2013年1月24日 木曜日 午前11時34分
Vue de la page 7
1 2 3 4 5 6 7 8 9 10 11 12 13 ... 139 140

Commentaires sur ces manuels

Pas de commentaire