Roland CD-2u Manuel du propriétaire Page 110

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 109
110
Creating a Copy of a Song at a New Playback Speed
You can change the playback speed of a song on an SD memory card (or a CD
), and save the new version of the song on the SD memory card.
* In order to edit a song on CD, you’ll need to use the dedicated AC adaptor (included) .
1
Insert the media that contains the song you want to edit.
* The song with the new playback speed will be created on the SD memory card. If you want to edit
a song that’s on a CD, you’ll need to provide both the CD and the SD memory card .
2
Select the song whose speed you want to change.
3
Press the [MENU] button to access the menu screen, and choose “Change
Speed?”
fig.menu-combine-e.eps
Press the [MENU] button to access the menu screen.
Use the [ ] [ ] buttons to choose “Change
Speed?”
Press the [ENTER] button to confirm your choice.
4
Use the [+] [-] buttons to change the playback speed setting, and press
the [ENTER] button.
If you’ve changed the pitch as described in “Slowing Down or Speeding Up
Playback”(Page 77), that value will be applied.
fig.menu-divide02-e.eps
5
If you’re sure you want to proceed, press the [ENTER] button.
(Note that the process cannot be interrupted once you’ve started it. If you decide that
you don’t want to begin the process, press the [EXIT] button.)
fig.divide-mssg-e.eps
The display will show “Processing..,” and the operation will be performed. When
processing has been completed, you’re returned to the audio source screen, and the
copy of the song at the new playback speed will be added at the end of the SD memory
card.
* If you want to audition the song, press the [ ] (Play)
button.
Media and song number of the song to be edited
Progress indication
It will take some time for this operation to take place. The maximum time required for
processing will be approximately 1.5 times the playback time of the song. (This will
depend on the playback speed setting.) For example, if you’re editing a four-minute song
at a playback speed of 50 (half speed), processing will take approximately six minutes.
The SD memory card must have enough free space to contain the newly created song. For
example, if you’re editing a four-minute song at a playback speed of 50 (half speed), you
won’t be able to execute the operation unless the SD memory card has at least eight
minutes of recording time remaining.
This operation cannot be executed if the length of the song after editing would be less
than four seconds.
Key, pitch, and Center Cancel settings are not reflected in the resulting song copy.
This operation cannot be performed if the SD memory card’s write protect switch (Page
26) is in the “LOCK” position.
Important
CD-2u_SD-2u_e.book 110 ページ 2013年1月24日 木曜日 午前11時34分
Vue de la page 109
1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 139 140

Commentaires sur ces manuels

Pas de commentaire