Roland VS-2400CD Manuel d'utilisateur télécharger pdf (Page 16)

5 ROLAND VS SETTINGS

Set the R-Bus 2 Optical Select to “R-Bus-2-3/4, R-Bus-2-7/8”

Input to VS-2480

From the EZ Routing menu, select Routing View

In the Patch Bay section of the screen (top left), attach up to 16 input mixer channels to the

16 R-Bus inputs (R-Bus 1 and R-Bus 2) using the mouse.

Raise the appropriate input mixer channel faders to monitor the incoming audio signals.

Output from VS-2480

From the EZ Routing menu, select Routing View

In the Output Assign section of the screen (Top Right), turn Track Direct to ON.

Use the mouse to connect the R-Bus output pairs on the top of the screen with the Track

Numbers down the right side of the screen.

This will route individual VS-2480 audio track outputs to the V-Fire inputs via R-Bus.

Alternatively,

Leave Track Direct OFF and connect the R-Bus output pairs on the top of the screen to Auxes,

Directs or Busses of your choice, using the TIME/VALUE wheel or mouse.

5.2 Roland VS-2400CD, using the onboard LCD screen

Digital Clock (Slave)

Press SHIFT-F4 to access the Utility menu, and select “3 Project”.

Set the Master Clock to R-Bus.

[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the

V-Fire digital clock.]

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Pas de commentaire

Roland VS-2400CD Manuel d'utilisateur Page 16