Roland VS-2400CD Manuel d'utilisateur télécharger pdf (Page 14)

5 ROLAND VS SETTINGS

5 Roland Parameter Settings When Used With the V-Fire

Important

: The instructions below are provided as specific steps to setup the Roland device to

work properly with the PreSonus V-Fire. Please refer to the Owner’s Manual of the specific

Roland device for a better understanding of the routing and clocking possibilities when used

with R-Bus devices, such as the V-Fire.

Note: In these examples, the Roland product will be set to clock to the V-Fire.

(i.e. slaved to the digital clock of the V-Fire)

However, digital clock could be set in the opposite direction by leaving the Roland on its

default selection of Internal clock, and setting the V-Fire digital clock to R-Bus1 or R-Bus2 in

the V-Fire software control panel.

5.1 Roland VS-2480CD/DVD, Using the Onboard LCD Screen

Digital Clock (Slave)

Press the Utility Button, and select “3 Project”

Turn the Master Clock setting to R-Bus1 or R-Bus2

[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the

V-Fire digital clock.]

Set the R-Bus2 Coaxial Select to “R-Bus-2-1/2, R-Bus-2-5/6”

Set the R-Bus2 Optical Select to “R-Bus-2-3/4, R-Bus-2-7/8”

Input to VS-2480

Press EZ ROUTING, and then press F1 for View.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 26 27

Pas de commentaire

Roland VS-2400CD Manuel d'utilisateur Page 14