Roland VS-2400CD Manuel d'utilisateur télécharger pdf (Page 19)

5 ROLAND VS SETTINGS

5.3 Roland VSR-880

Digital Clock (Slave)

Press SHIFT+SYSTEM until you see SYSTEM PRM, and press ENTER.

Use Parameter buttons to select the MasterClk screen.

Use the TIME/VALUE Knob to set MasterClk to “R-BUS”.

[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the

V-Fire digital clock.]

Output from VSR-880

Press LEVEL/BALANCE.

Use PARAMETER buttons to select the “MST Direct Out” screen.

Use the TIME/VALUE Knob to set Direct Out to ON.

Input to VSR-880

Press SHIFT + IN MIX (LEVEL/BALANCE).

Use PARAMETER buttons to select the “Input =” screen.

Use the TIME/VALUE Knob to set Input = R-Bus.

To do this for each input, you’ll need to hold SHIFT and press the STATUS button for every

odd-numbered input, one at a time. (Note: The inputs are adjusted in pairs.)

Change each odd-numbered input to R-Bus, …the even-numbered input will also be set to R-

Bus.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Pas de commentaire

Roland VS-2400CD Manuel d'utilisateur Page 19