Roland VS-2400CD Manuel d'utilisateur télécharger pdf (Page 18)

5 ROLAND VS SETTINGS

Set the Master Clock to R-Bus.

[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the

V-Fire digital clock.]

Input to VS-2400CD

From the EZ ROUTING menu, press F1 for View.

In the Patch Bay section of the screen (top left), attach up to 8 input mixer channels to the 8

R-Bus inputs using the mouse.

Raise the appropriate input mixer channel faders to monitor the incoming audio signals.

Note: R-Bus is routed to Input Mixer channels 9-16 by default.

Output from VS-2400CD

From the EZ Routing menu, select Routing View.

In the Output Assign section of the screen (Top Right), turn Track Direct to ON.

Use the mouse to connect the R-Bus output pairs on the top of the screen with the Track

Numbers down the right side of the screen.

This will route individual VS-2400CD audio track outputs to the V-Fire inputs via R-Bus.

Alternatively,

Leave Track Direct OFF and connect the R-Bus output pairs on the top of the screen to Auxes,

Directs or Busses of your choice, using the TIME/VALUE wheel or mouse.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 26 27

Pas de commentaire

Roland VS-2400CD Manuel d'utilisateur Page 18