Roland GT-8 Manuel du propriétaire télécharger pdf (Page 53)

Chapter

Chapter 5 Using Pedals to Control the Effects

With the GT-8, each effect features various different

parameters, and you can adjust these as you perform to

produce even more effective changes in your tones.

Although the GT-8’s CTL and EXP pedals and other

controllers already feature settings allowing them to be used

in switching effects on and off and for wah pedal, foot

volume, and other functions, you can also control the

parameters you prefer by assigning them to these pedals.

You can also control parameters using external pedals, MIDI

devices, or other gear connected to the GT-8.

On top of all this, the GT-8 features an “internal pedal

system,” which lets you produce effects including automatic

changes of parameters in real time, thus enabling you to

create an even greater wealth of tonal changes.

Use-Specific Guide

Using the GT-8’s Controllers With the

Same Functions Assigned at All Times

You can set the CTL pedal, EXP pedal switch, and EXP pedal

functions as common settings applied globally to the GT-8,

for example when you want to use the EXP pedal

continuously as a volume pedal.

“Setting the Operation of the CTL Pedal (CTL Pedal

Function)” (p. 54)

“Setting the Operation of the EXP Pedal Switch (EXP Switch

Function)” (p. 54)

“Setting the Operation of the EXP Pedal (EXP Pedal

Function)” (p. 54)

Using External Controllers With the

Same Functions Assigned at All Times

You can have settings assigned to a foot switch (FS-6/FS-5U)

or expression pedal (EV-5) connected to the rear panel’s EXP

PEDAL/CTL1,2 jacks as common settings applied globally to

the GT-8.

“Setting the Operation of External Foot Switches (Sub CTL 1,

2 Function)” (p. 55)

“Setting the Operation of an External EXP Pedal (Sub EXP

Pedal Function)” (p. 56)

Setting GT-8 Controller Functions to

Individual Patches

If you want to be able to change the CTL pedal, EXP pedal

switch, and EXP pedal functions for each individual patch,

for example using the EXP pedal to change the volume in one

patch, and then in another patch using the EXP pedal as a

wah pedal, use the “Assign CTL/EXP” settings.

“Setting the Operation of the CTL Pedal, EXP Pedal Switch,

and EXP Pedal (Assign CTL/EXP)” (p. 56)

Setting GT-8 and External Controller

Functions to Individual Patches

When you want to freely assign and control effect

parameters to the GT-8’s own controllers (CTL/EXP pedals,

EXP pedal switch) as well as external controllers (foot switch

and expression pedal) connected to the rear panel’s EXP

PEDAL/CTL1,2 jacks, use the “Assign Variable “settings.

In each patch you can set up to eight different types (Assign

numbers) determining which parameter is to be controlled

by a particular controller.

* You can use the Internal Pedal System with “Assign Variable.”

In addition, you can use the “Assign Variable” function to set

controllers using Control Change messages from external

MIDI devices.

“Setting the Operation of the GT-8 and External Controllers

(Assign Variable)” (p. 57)

When using “ASSIGN CTL/EXP” and “ASSIGN

VARIABLE,” set the following settings to “Assignable”

(or “Auto”).

“ASSIGN CTL/EXP” and “ASSIGN VARIABLE” do not

function when a different setting is selected.

CTL Pedal Function (p. 54)

EXP Switch Function (p. 54)

EXP Pedal Function (p. 54)

Sub CTL 1, 2 Function (p. 55)

Sub EXP Pedal Function (p. 56)

GT-8_e.book 53 ページ２００６年７月２５日　火曜日　午後１時４９分

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Roland GT-8 Manuel du propriétaire Page 53

Commentaires sur ces manuels

Produits connexes et manuels pour Pianos numériques Roland GT-8