Roland XP-80 Manuel du propriétaire télécharger pdf (Page 41)

Editing a Performance

Start with an existing Performance and edit it to create a new

Performance. But before you do, try to envision what the

entire Performance will sound like and decide which Patch

to assign to each of 16 Parts.

❶

In the Play display (PERFORM), press a button from

[F1] (Common)–[F6] (Info) to choose a display group.

❷

If you have selected Effects or Info group, press a but-

ton from [F1]–[F6] to call up the desired display page.

✳

As the Common, K.Range, Part and MIDI display

groups have only one display page, you can call up the

desired display page simply by selecting any of these

groups.

❸

If you have pressed any of [F2] (K.Range)–[F5] (Effects)

in step 1, press TRACK/PART [1]–[16] to choose the

Part you want to modify.

The button indicator of the selected Part will light and the

Part number and the Patch name assigned to the Part will be

displayed at display upper right.

✳

If you have selected [F1] (Common) in step 1, your

editing will modify a parameter that’s common to the

entire Performance so you can’t pick any specific Part

to modify.

❹

Move the cursor to the parameter you wish to modify.

❺

Use the VALUE dial, [INC]/[DEC] or numeric keys to

change the parameter value.

✳

If you’ve made a mistake in setting the parameter

value or you don’t like the changes, press [UNDO/

REDO] to restore the value to what it was.

❻

Repeat steps 1–5 to complete a Performance.

❼

When you finish making settings, press [EXIT] or

[PERFORM] to return to the Play display (PERFORM).

An asterisk (*) will be displayed at the left of the

Performance group to indicate Performance settings have

been modified.

✳

If you select another Performance in the group with an

asterisk (*), the modified Performance settings will be

lost. To keep these modified settings, you must write

them into user memory (p.46).

Editing a Performance using Palette display

You can also edit a Performance using the Palette display in

Performance mode. When modifying Part settings for a

Performance, the values for eight Parts (Part 1–8 or Part

9–16) will be displayed together on a single display. This is

useful when you wish to change parameter values while

comparing each Part settings.

❶

When modifying a Part, press [F6] (Palette) to call up

the Palette display.

✳

You can press [F6] (Palette) only when the Palette dis-

play can be active.

❷

Press a TRACK/PART [1]–[16] button or [l

] and [r

]

to choose the Part you want to modify.

The button indicator of the selected Part will light and the

Part number and the Patch name assigned to the Part will be

shown at display upper right.

✳

To call up the Palette display for Parts 9–16 when the

Part 1–8 Palette is on display, press [F1] (9-16). Press

[F1] (1-8) for vice versa.

❸

Press [u

] or [d

] to move the cursor to the parameter

you want to modify.

❹

Use the VALUE dial, [INC]/[DEC] or numeric keys to

change the parameter value.

✳

If you’ve made a mistake in setting the parameter

value or you don’t like the changes, press

[UNDO/REDO] to restore the value to what it was.

❺

Repeat steps 1–4 to configure a Performance.

❻

To exit the Palette display, press [F6].

The Part number to which the display will return will be

indicated for [F6].

Part number

Patch name

Chapter 3. Creating your own sounds

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 243 244

Commentaires sur ces manuels

Pas de commentaire

Roland XP-80 Manuel du propriétaire Page 41

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Roland XP-80