Roland XP-80 Manuel du propriétaire Page 162

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 244
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 161
164
Preventing user memory writing
operation – 5 Protect
(User memory protect)
This function prevents user memory from being rewritten to
ensure Patch, Performance or Rhythm Set data will not acci-
dentally be lost.
Write Operation
This prevents the Write operation from rewriting user mem-
ory. When this setting is ON, the data cannot be rewritten.
Data can be rewritten only if it is OFF. When the XP-80’s
power is turned on, this setting is always ON, so you will
need to set it OFF before rewriting user memory settings. It
is also possible to set this OFF as part of the Write operation
or Factory Preset operation.
System Exclusive Message
This prevents incoming System Exclusive messages from an
external MIDI device from rewriting user memory settings.
When this is set ON, the data cannot be rewritten. Data can
be rewritten when it is OFF.
If this parameter is OFF, data can be rewritten by an
incoming System Exclusive message even if the Write
Operation parameter setting is ON.
<Procedure>
Make sure that the Utility Menu display (UTILITY) is
up.
Press [F6] (Menu) to select Menu 1, then press [F5]
(Protect) to select User Memory Protect.
You can also select User Memory Protect by moving the cur-
sor to “5 Protect” and pressing [ENTER] on the Utility Menu
display (UTILITY), or pressing the numeric key [5], then
[ENTER].
Move the cursor to “Write Operation” and specify ON
or OFF.
Move the cursor to “System Exclusive Message” and
specify ON or OFF.
Erasing the internal song –
6 Song Init (Song initialize)
This function clears the internal song in the internal memo-
ry. It is used before recording a new song.
<Procedure>
Make sure that the Utility Menu display (UTILITY) is
up.
Press [F6] (Menu) to select Menu 2, then press [F1]
(SngInit) to select Song Initialize.
You can also select Song Initialize by moving the cursor to
“6 Song Init” and pressing [ENTER] on the Utility Menu dis-
play (UTILITY), or pressing the numeric key [6], then
[ENTER].
Press [F6] (Execute) to perform song initialization.
When song initialization is completed, the Play display
(SEQ) appears.
Checking internal memory con-
sumption – 7 Memory Info
(Internal memory information)
This function lets you check the amount of data stored in
internal memory. Repeating track editing or quantization
processes will create data nonessential for playback of the
internal song. Erase such data with the Data Reduce func-
tion.
Song Data Block
Displays the amount of the internal song data.
<Total> shows the maximum memory data capacity,
<Used> the amount of memory used for current data, and
<Avail> the memory amount available for use.
A graphic display will also appear for reference.
Sys. Excl Data Block (System exclusive message data
block)
Displays the amount of the System Exclusive message data
in the internal song. If the internal song contains large
amounts of System Exclusive message data, it may prevent
recording or undo operations.
<Total> shows the maximum memory data capacity,
<Used> the amount of memory used for the current data,
and <Avail> the memory amount available for use.
A graphic display will also appear for reference.
<Procedure>
Make sure that the Utility Menu display (UTILITY) is
up.
Press [F6] (Menu) to select Menu 2, then press [F2]
(Memory) to select Internal Memory Information.
You can also select Internal Memory Information by moving
the cursor to “7 Memory” and pressing [ENTER] on the
Utility Menu display (UTILITY), or pressing the numeric key
[7], then [ENTER].
Check the amount of internal memory used on the
Internal Memory Information display (UTILITY/
Memory).
Chapter 8. XP-80 memory settings (Utility mode)
[UTILITY][5]/[6]/[7][ENTER]
Vue de la page 161
1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 243 244

Commentaires sur ces manuels

Pas de commentaire