Roland Jupiter 80 Manuel d'utilisateur télécharger pdf (Page 92)

Connecting an External MIDI Device

Specifying the Transmit Channel

Set the JUPITER-80’s transmit channel so it matches the channel

your external MIDI device is using for reception.

1. In the Registration External Part screen (p. 31), touch <KBD>

to turn it on for the channel that you want to transmit.

When you play the keyboard, performance data will be transmitted

from the MIDI OUT connector on the channel you specied.

MEMO

For details on how to set the receive channel of your external

MIDI device, refer to its owner’s manual.

Specifying the Sound for Each Channel

To switch the tones of an external MIDI device, the program

number and the MSB/LSB of the Bank Select message are entered

as numerical values on the JUPITER-80.

1. Specify the program change and bank select MSB/LSB

for the channels for which you turned on <KBD> in the

Registration External Part screen (p. 31).

MEMO

• When this setting is “- - -,” bank select and program change

messages will not be transmitted.

• If the external MIDI sound module transmits a Program number

or a Bank number for which no Tone has been assigned, an

alternate Tone may be selected, or in some cases, there may be

no sound played.

Detailed Settings for External Parts

Here you can make detailed settings for the messages transmitted

to an external MIDI device.

Parameter Value Explanation

KBD OFF, ON

Species whether the perfor-

mance data of the External Part

will be transmitted.

MSB

0–127, ---

* Not transmitted for

Parts whose KBD is o.

Species the MSB (controller

number 0) of the bank select

number transmitted when you

switch Registrations.

Choose “---” if you don’t want

this to be transmitted.

LSB

0–127, ---

* Not transmitted for

Parts whose KBD is o.

Species the LSB (controller

number 32) of the bank select

number transmitted when you

switch Registrations.

Choose “---” if you don’t want

this to be transmitted.

1–128, ---

* Not transmitted for

Parts whose KBD is o.

Species the program change

number transmitted when you

switch Registrations.

Choose “---” if you don’t want

this to be transmitted.

OCT

-3–+3

* This parameter is valid

only for Parts whose

KBD is on.

Species the octave shift.

Key Lo

C- –(Key Up)

* This parameter is valid

only for Parts whose

KBD is on.

Species the lowest key of the

range that will sound.

Key Up

(Key Lo)–G9

* This parameter is valid

only for Parts whose

KBD is on.

Species the highest key of the

range that will sound.

Velo Lo

1–(Velo Up)

* This parameter is valid

only for Parts whose

KBD is on.

Species the lowest velocity

value.

Velo Up

(Velo Lo)–127

* This parameter is valid

only for Parts whose

KBD is on.

Species the highest velocity

value.

Level

0–127, ---

* Not transmitted for

Parts whose KBD is o.

Species the volume message

transmitted when you switch

Registrations.

Choose “---” if you don’t want

this to be transmitted.

Pan

L64–0–63R, ---

* Not transmitted for

Parts whose KBD is o.

Species the pan message

transmitted when you switch

Registrations.

Choose “---” if you don’t want

this to be transmitted.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Roland Jupiter 80 Manuel d'utilisateur Page 92

Commentaires sur ces manuels

Produits connexes et manuels pour Synthétiseurs Roland Jupiter 80