Roland Jupiter 80 Manuel d'utilisateur télécharger pdf (Page 47)

Introduction Playing Sounds Editing Sounds

Other Convenient

Functions

Connecting Other

Equipment

Appendix

Moving Your Hand to Modify the

Pitch or Volume (D Beam Controller)

You use the D Beam controller simply by moving your hand above

it. By assigning dierent functions to it, you can control the sound

in various ways.

MEMO

D Beam controller settings are saved in the Registration.

1. Press the D BEAM [PITCH], [VOLUME], or [ASSIGNABLE]

button to turn the D Beam controller on.

Button Explanation

[PITCH] button

The pitch will change as you move your hand

above the D Beam controller.

[VOLUME] button

The volume will change, allowing you to add

expression to your performance.

[ASSIGNABLE] button

The function assigned to the D Beam

controller will be controlled.

MEMO

You can assign a performance-related function to the

[ASSIGNABLE] button. The function assigned to the

[ASSIGNABLE] button is specied by the Registration Common/

Control parameter D Beam (p. 31).

2. While playing the keyboard to produce sound, position

your hand above the D Beam controller and slowly move

it up and down.

3. To turn o the D Beam controller, once again press the

button you pressed in step 1 (the button will go out).

Eective range of the D Beam controller

This illustration shows the eective range of the

D Beam controller. No eect will be obtained

if you position your hand outside the eective

range.

NOTE

The eective range of the D Beam controller

will change depending on the lighting

conditions. If the D Beam controller does not

work as you expect, readjust the sensitivity.

For details on readjust the sensitivity, refer to “D Beam Sens” (p.

84).

Changing the Pitch/Applying Vibrato

(Pitch Bend/Modulation Lever)

While playing the keyboard, move the lever toward the left to lower

the pitch, or toward the right to raise the pitch. This is called “pitch

bend.”

Moving the lever away from yourself will apply vibrato.

This is called “modulation.”

Moving the lever away from yourself while also moving it to left or

right will apply both eects simultaneously.

MEMO

For some sounds, the modulation lever will produce a dynamics

eect.

Using the Buttons and Knobs to Modify the

Sound ([S1] [S2] buttons / [E1]–[E4] knobs)

Performance-related functions are assigned to the [S1] [S2] buttons

and [E1]–[E4] knobs. While you perform, you can operate the [S1]

[S2] buttons or [E1]–[E4] knobs to modify the sound in real time.

Turning the [S1] [S2] buttons on/o will turn on/o or switch the

assigned function.

MEMO

You can assign performance-related functions to the [S1] [S2]

buttons. The [S1] [S2] button assignments are specied by the

Registration Common/Control parameters S1-S2 (p. 31).

If the [E1]–[E4] knobs are shown in the Lower Part of the display,

operating these knobs will control the functions assigned to them.

Controlling the Performance

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 107 108

Commentaires sur ces manuels

Pas de commentaire

Roland Jupiter 80 Manuel d'utilisateur Page 47

Commentaires sur ces manuels

Produits connexes et manuels pour Synthétiseurs Roland Jupiter 80