Roland MIDI Implementation DP990F Manuel d'utilisateur télécharger pdf (Page 29)

● 0175: Telephone

No Parameter Value Description

1 Voice Quality #1 0-15 0-15

Audio quality of the telephone

voice

2 Treble 0-30 -15 - +15 dB Bandwidth of the telephone voice

3 Balance #2 0-100

D100:0 -

D0:100W

Volume balance between the direct

sound (D) and the effect sound (W)

4 Level 0-127 0-127 Output level

● 0156: Gate Reverb

This is a special type of reverb in which the reverberant sound is cut off before

its natural length.

No Parameter Value Description

1 Type #1 0-3

Normal,

Reverse,

Sweep1,

Sweep2

Type of reverb

Normal: conventional gated

reverb

Reverse: backwards reverb

Sweep1: the reverberant sound

moves from right to left

Sweep2: the reverberant sound

moves from left to right

2 Pre Delay 0-125 0.0-100.0 ms

Adjusts the delay time from the

direct sound until the reverb

sound is heard.

3 Gate Time 0-99 5-500 ms

Adjusts the time from when the

reverb is heard until it disappears.

4 Low Gain 0-30 -15 - +15 dB Gain of the low range

5 High Gain 0-30 -15 - +15 dB Gain of the high range

6 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the reverb sound

(W)

7 Level 0-127 0-127 Output Level

● 0200: Overdrive→Chorus

This effect connects an overdrive and a chorus in series.

No Parameter Value Description

1 Overdrive Drive 0-127 0-127

Degree of distortion Also changes

the volume.

2 Overdrive Pan 0-127 L64 - 63R

Stereo location of the overdrive

sound

3 Chorus Pre Delay 0-125 0.0-100.0 ms

Adjusts the delay time from the

direct sound until the chorus

sound is heard.

4 Chorus Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

5 Chorus Rate #1 1-127 0.05 - 10.00 Hz Frequency of modulation (Hz)

6 Chorus Rate 0-21 note Frequency of modulation (note)

7 Chorus Depth 0-127 0-127 Depth of modulation

8 Chorus Balance #2 0-100

D100:0W -

D0:100W

Adjusts the volume balance

between the sound that is sent

through the chorus (W) and the

sound that is not sent through the

chorus (D).

9 Level 0-127 0-127 Output Level

● 0201: Overdrive→Flanger

This effect connects an overdrive and a flanger in series.

No Parameter Value Description

1 Overdrive Drive 0-127 0-127

Degree of distortion Also changes

the volume.

2 Overdrive Pan 0-127 L64 - 63R

Stereo location of the overdrive

sound

3 Flanger Pre Delay 0-125 0.0-100.0 ms

Adjusts the delay time from when

the direct sound begins until the

flanger sound is heard.

4 Flanger Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

5 Flanger Rate #1 1-127 0.05-10.00 Hz Frequency of modulation (Hz)

6 Flanger Rate 0-21 note Frequency of modulation (note)

7 Flanger Depth 0-127 0-127 Depth of modulation

8 Flanger Feedback 0-98 -98 - +98%

Adjusts the proportion of the

flanger sound that is fed back into

the effect. Negative (-) settings will

invert the phase.

9 Flanger Balance #2 0-100

D100:0W -

D0:100W

Adjusts the volume balance

between the sound that is sent

through the flanger (W) and the

sound that is not sent through the

flanger (D).

10 Level 0-127 0-127 Output Level

● 0202: Overdrive→Delay

This effect connects an overdrive and a delay in series.

No Parameter Value Description

1 Overdrive Drive #1 0-127 0-127

Degree of distortion Also changes

the volume.

2 Overdrive Pan 0-127 L64 - 63R

Stereo location of the overdrive

sound

3 Delay Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

4 Delay Time 0-127 0 - 2540 ms

Adjusts the delay time from the

direct sound until the delay sound

is heard. (Hz)

5 Delay Time 0-21 note

Adjusts the delay time from the

direct sound until the delay sound

is heard. (note)

6 Delay Feedback 49-89 0 - +80%

Adjusts the proportion of the delay

sound that is fed back into the

effect.

7 Delay HF Damp 0-17

200-8000 Hz,

Bypass

Adjusts the frequency above which

sound fed back to the effect will be

cut. If you do not want to cut the

high frequencies, set this

parameter to Bypass.

8 Delay Balance #2 0-100

D100:0W -

D0:100W

Adjusts the volume balance

between the sound that is sent

through the delay (W) and the

sound that is not sent through the

delay (D).

9 Level 0-127 0-127 Output Level

● 0203: Distortion→Chorus

The parameters are essentially the same as in “Overdrive→Chorus,” with the

exception of the

following two.

Overdrive Drive→Distortion Drive

Overdrive Pan→Distortion Pan

● 0204: Distortion→Flanger

The parameters are essentially the same as in “Overdrive→Flanger,” with the

exception of the

following two.

Overdrive Drive→Distortion Drive

Overdrive Pan→Distortion Pan

● 0205: Distortion→Delay

The parameters are essentially the same as in “Overdrive→Delay,” with the

exception of the

following two.

Overdrive Drive→Distortion Drive

Overdrive Pan→Distortion Pan

1 2 ... 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Roland MIDI Implementation DP990F Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Roland MIDI Implementation DP990F