Roland MIDI Implementation DP990F Manuel d'utilisateur télécharger pdf (Page 27)

● 015f: Stereo Delay5

This is a stereo delay.

No Parameter Value Description

1 Delay Left Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Delay Left 0-127 0-1270 ms

Adjusts the time until the delay

sound is heard. (Hz)

3 Delay Left 0-21 note

Adjusts the time until the delay

sound is heard. (note)

4 Delay Right Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

5 Delay Right 0-127 0-1270 ms

Adjusts the time until the delay

sound is heard. (Hz)

6 Delay Right 0-21 note

Adjusts the time until the delay

sound is heard. (note)

7 Phase Left 0-1

8 Phase Right 0-1

Normal,

Inverse

Phase of the delay sound

9 Feedback Mode 0-1 Normal, Cross

Selects the way in which delay

sound is fed back into the effect.

(See the figures above.)

10 Feedback #1 49-89 0 - +80%

Adjusts the amount of the delay

sound that’s fed back into the

effect.

11 HF Damp 0-17

200-8000 Hz,

Bypass

Adjusts the frequency above which

sound fed back to the effect is

filtered out. If you don’t want to

filter out any high frequencies, set

this parameter to Bypass.

12 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

13 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

14 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the delay sound (W)

15 Level 0-127 0-127 Output level

● 0150: Monaural Delay

A delay that provides a long delay time.

No Parameter Value Description

1 Delay Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Delay Time 0-127 0-2540 ms

Delay time from when the original

sound is heard to when the delay

sound is heard (Hz)

3 Delay Time #1 0-21 note

Delay time from when the original

sound is heard to when the delay

sound is heard (note)

4 Phase 0-1

NORMAL,

INVERSE

Phase of the delay (NORMAL: non-

inverted, INVERSE: inverted)

5 Feedback 49-89 0 - +80%

Proportion of the delay sound that

is to be returned to the input

6 HF Damp 0-17

200-8000 Hz,

Bypass

Frequency at which the high-

frequency content of the delayed

sound will be cut (Bypass: no cut)

7 Pan 0-127 L64 - 63R Panning of the delay sound

8 Low Gain 0-30 -15 - +15 dB

Amount of boost/cut for the high-

frequency range

9 High Gain 0-30 -15 - +15 dB

Amount of boost/cut for the high-

frequency range

10 Balance #2 0-100

D100:0W -

D0:100W

Volume balance of the original

sound (D) and the delay sound (W)

11 Level 0-127 0-127 Output volume

● 0151: Modulation Delay

Adds modulation to the delayed sound.

No Parameter Value Description

1 Delay Left Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Delay Left 0-127 0-1270 ms

Adjusts the time until the delay

sound is heard. (Hz)

3 Delay Left 0-21 note

Adjusts the time until the delay

sound is heard. (note)

4 Delay Right Mode 0-1 ms, note

5 Delay Right 0-127 0-1270 ms

6 Delay Right 0-21 note

Settings of the Delay R The

parameters are the same as for the

Delay L.

7 Feedback Mode 0-1 Normal, Cross

Selects the way in which delay

sound is fed back into the effect

(See the figures above.)

8 Feedback 49-89 0 - +80%

Adjusts the amount of the delay

sound that’s fed back into the

effect.

9 HF Damp 0-17

200-8000 Hz,

Bypass

Adjusts the frequency above which

sound fed back to the effect is

filtered out. If you don’t want to

filter out any high frequencies, set

this parameter to Bypass.

10 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

11 Rate 1-127 0.05-10.00 Hz Frequency of modulation (Hz)

12 Rate 0-21 note Frequency of modulation (note)

13 Depth #1 0-127 0-127 Depth of modulation

14 Phase 0-90 0-180 deg Spatial spread of the sound

15 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

16 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

17 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the delay sound (W)

18 Level 0-127 0-127 Output level

● 0152: Triple Tap Delay

Produces three delay sounds; center, left and right.

No Parameter Value Description

1 Delay Left Mode 0-1 ms, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Delay Left 0-127 0-2540 ms

Adjusts the time until the delay

sound is heard. (Hz)

3 Delay Left 0-21 note

Adjusts the time until the delay

sound is heard. (note)

4 Delay Right Mode 0-1 ms, note

5 Delay Right 0-127 0-2540 ms

6 Delay Right 0-21 note

Settings of the Delay R The

parameters are the same as for the

Delay L.

7 Delay Center Mode 0-1 ms, note

8 Delay Center 0-127 0-2540 ms

9 Delay Center 0-21 note

Settings of the Delay C The

parameters are the same as for the

Delay L.

10 Center Feedback #1 49-89 0 - +80%

Adjusts the amount of the delay

sound that’s fed back into the

effect.

11 HF Damp 0-17

200-8000 Hz,

Bypass

Adjusts the frequency above which

sound fed back to the effect is

filtered out. If you do not want to

filter out any high frequencies, set

this parameter to Bypass.

12 Left Level 0-127 0-127 Volume of each delay

13 Right Level 0-127 0-127 Volume of each delay

14 Center Level 0-127 0-127 Volume of each delay

15 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

16 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

17 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the delay sound (W)

18 Level 0-127 0-127 Output level

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire

Roland MIDI Implementation DP990F Manuel d'utilisateur Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Roland MIDI Implementation DP990F