Roland MIDI Implementation DP990F Manuel d'utilisateur télécharger pdf (Page 22)

● 0103: Humanizer

Adds a vowel character to the sound, making it similar to a human voice.

No Parameter Value Description

1 Drive Sw 0-1 Off, On Turns Drive on/off.

2 Drive #2 0-127 0-127

Degree of distortion Also changes

the volume.

3 Vowel1 0-4 a, e, i, o, u Selects the vowel.

4 Vowel2 0-4 a, e, i, o, u Selects the vowel.

5 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

6 Rate 1-127 0.05-10.00 Hz

Frequency at which the two vowels

switch (Hz)

7 Rate #1 0-21 note

Frequency at which the two vowels

switch (note)

8 Depth 0-127 0-127 Effect depth

9 Input Sync Sw 0-1 Off, On

Determines whether the LFO for

switching the vowels is reset by

the input signal (ON) or not (OFF).

10 Input Sync Threshold 0-127 0-127

Volume level at which reset is

applied

11 Manual 0-100 0-100

Point at which Vowel 1/2 switch

49 or less: Vowel 1 will have a

longer duration.

50: Vowel 1 and 2 will be of equal

duration.

51 or more: Vowel 2 will have a

longer duration.

12 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

13 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

14 Pan 0-127 L64 - 63R Stereo location of the output

15 Level 0-127 0-127 Output level

● 012b: Ring Modulator

This is an effect that applies amplitude modulation (AM) to the input signal,

producing bell-like sounds. You can also change the modulation frequency in

response to changes in the volume of the sound sent into the effect.

No Parameter Value Description

1 Frequency #1 0-127 0-127

Adjusts the frequency at which

modulation is applied.

2 Sens 0-127 0-127

Adjusts the amount of frequency

modulation applied.

3 Polarity 0-1 Up, Down

Determines whether the frequency

modulation moves towards higher

frequencies (Up) or lower

frequencies (Down).

4 Low Gain 0-30 -15 - +15 dB Gain of the low frequency range

5 High Gain 0-30 -15 - +15 dB Gain of the high frequency range

6 Balance #2 0-100

D100:0W -

D0:100W

Volume balance between the direct

sound (D) and the effect sound (W)

7 Level 0-127 0-127 Output level

● 0125: Tremolo

Cyclically modulates the volume to add tremolo effect to the sound.

No Parameter Value Description

1 Mod Wave 0-4

Tri, Sqr, Sin,

Saw1, Saw2

Modulation Wave

Tri: Triangle wave

Sqr: Square wave

Sin: Sine wave

Saw1/2: Sawtooth wave

2 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

3 Rate #1 1-127 0.05 - 10.00 Hz Frequency of the change (Hz)

4 Rate 0-21 note Frequency of the change (note)

5 Depth #2 0-127 0-127 Depth to which the effect is applied

6 Low Gain 0-30 -15 - +15 dB Gain of the low range

7 High Gain 0-30 -15 - +15 dB Gain of the high range

8 Level 0-127 0-127 Output Level

● 0126: Auto Pan

Cyclically modulates the stereo location of the sound.

No Parameter Value Description

1 Mod Wave 0-4

Tri, Sqr, Sin,

Saw1, Saw2

Modulation Wave

Tri: Triangle wave

Sqr: Square wave

Sin: Sine wave

Saw1/2: Sawtooth wave

2 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

3 Rate #1 1-127 0.05 - 10.00 Hz Frequency of the change (Hz)

4 Rate 0-21 note Frequency of the change (note)

5 Depth #2 0-127 0-127 Depth to which the effect is applied

6 Low Gain 0-30 -15 - +15 dB Gain of the low range

7 High Gain 0-30 -15 - +15 dB Gain of the high range

8 Level 0-127 0-127 Output Level

● 012c: Slicer

By applying successive cuts to the sound, this effect turns a conventional

sound into a sound that appears to be played as a backing phrase. This is

especially effective when applied to sustain-type sounds.

No Parameter Value Description

1 Rate Mode 0-1 Hz, note

When this is set to “note,” the

effect is synchronized with the

tempo.

2 Rate 1-127 0.05-10.00 Hz

Rate at which the 16-step sequence

will cycle (Hz)

3 Rate #1 12-21 note

Rate at which the 16-step sequence

will cycle (note)

4 Attack 0-127 0-127

Speed at which the level changes

between steps

5 Input Sync Sw 0-1 Off, On

Specifies whether an input note will

cause the sequence to resume

from the first step of the sequence

(ON) or not (OFF)

6 Input Sync Threshold 0-127 0-127

Volume at which an input note will

be detected

Sets the manner in which the

volume changes as one step

progresses to the next.

Legato: The change in volume from

one step’s level to the next

remains unaltered. If the level of a

following step is the same as the

one preceding it, there is no

change in volume.

7 Mode 0-1 Legato, Slash

Slash: The level is momentarily set

to 0 before progressing to the

level of the next step. This change

in volume occurs even if the level

of the following step is the same as

the preceding step.

8 Shuffle #2 0-127 0-127

Timing of volume changes for

even- numbered steps (step 2,

step 4, step 6...). The higher the

value, the later the beat

progresses.

9 Level 0-127 0-127 Output level

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Commentaires sur ces manuels

Pas de commentaire

Roland MIDI Implementation DP990F Manuel d'utilisateur Page 22

Commentaires sur ces manuels

Produits connexes et manuels pour Les dispositifs de saisie Roland MIDI Implementation DP990F