Roland VS-540 Guide d'installation télécharger pdf (Page 41)

6. Installing the Blade

CAUTION

Be sure to perform operations as specied by these instructions, and

never touch any area not specied in the instructions.

Sudden movement of the machine may cause injury.

CAUTION

Never touch the tip of the blade with your ngers.

Doing so may result in injury, and the cutting performance of the blade will be

impaired.

Insert a blade into the blade holder.

Enter the blade replacement mode.



Press .



Press several times until the screen shown on the

left appears.

Press

in this order.

Press .

Press

twice.

Press .

Open the front cover.

The cutting carriage moves to the position where the blade can be replaced,

and then the message on the left appears.

When this message appears, the preparation is complete.

NOW PROCESSING..

OPEN FRONT

COVER

Insert the pin.

Insert the pin to the position where

its end sticks out about 3 to 5 mil-

limeters.

Blade

Insert the blade.

Blade holder

Cap

Insert the blade.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

Pas de commentaire

Roland VS-540 Guide d'installation Page 41