Roland VS-540 Guide d'installation télécharger pdf (Page 38)

5. Installing the Ink Cartridges

}

Continuously, clean the print heads in the order of the slots 3 and 4, the slots 5 and 6,

and then the slots 7 and 8 as following the on-screen instructions.

Insert and remove the SOL INK cleaning cartridge and dummy cartridge from and into the slot with the

slot number indicated on the screen. If the slot number is incorrect, lling with ink will fail.

Insert the ink cartridges of the respective colors.



Gently shake the ink cartridges of the re-

spective colors before inserting them to

the slots.



Insert the ink cartridges into the slots 7 and 8.

Insert the dummy cartridges to the slots 1 to 6.

With the same procedure of

2.-

, insert the dummy cartridges.

Press .

Pull out the dummy cartridges from the slots 1 to 6.

Press

When having diculty pulling out the dummy cartridges, insert the re-

tainer used in the procedure

2.-

into the slots to make the task easier.

For instructions for use of the retainer, see the procedure

2.-

(When

pulling out only the retainer, you can remove it easily by tilting it slightly

forward.)

Insert into the slot of the

matching color.

Label

surface

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

Pas de commentaire

Roland VS-540 Guide d'installation Page 38