Roland VS-540 Guide d'installation télécharger pdf (Page 35)

5. Installing the Ink Cartridges

Clean the heads using the cleaning cartridges.



Use to select the ink type.

Press



Check the ink type and use to select [Yes].

Press

Make sure the drain bottle is installed.

Press

Insert cleaning cartridges into slots 1 and 2.

Insert rmly until you hear a beep.

Insert and remove the cartridges of which slot numbers are ashing.

The above sample message shows you should remove the SOL INK cleaning cartridges from the

slots 1 and 2.

When the relevant cartridges are removed correctly, the ashing numbers are cleared.

Cleared

Flashing

In the case of 4 colors of CMYK (CMYK mode)

In the case of 6 colors of CMYKLcLm (CMYKLcLm mode)

In the case of 8 colors of CMYKLcLmWMT (WMT mode)

Label

surface

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 55 56

Pas de commentaire

Roland VS-540 Guide d'installation Page 35