Roland Metaza MPX-80 Manuel d'utilisateur télécharger pdf (Page 81)

Chapter 5 Maintenance and Adjustment

5-5 Registration of Custom Material

➍

Enter a name for the composition you’re registering.

Adjust the impact values.

The printing results vary according to the hardness of the material. Adjust to

match the material.

➎

Click [OK].

The [Details] window closes.

➏

Click [OK].

The setting window closes.

This completes registration of a composition and a striking force appropriate for it. To obtain printing result of even

higher quality, carry out test printing and overprinting on the same material, and adjust the impact values while

examining the printing results.

Raise

• When dark areas of the image are not struck

Lower

• When dark areas of the image are whitish (too bright)

• When overall striking is too forceful

Raise

• When bright areas of the image are struck with too

little force (too dark)

• When overall striking is too weak

Lower

• When white areas of the image are struck with too

much force

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 95 96

Pas de commentaire

Roland Metaza MPX-80 Manuel d'utilisateur Page 81