Roland XR-640 Guide d'installation

Setup GuideThis describes the setup tasks and important conditions about the installation location that must be met in order to enable use of this mac

To Ensure Safe Use8Warning labels are afxed to make areas of danger immediately clear. The meanings of these labels are as follows. Be sure to heed

9 Pour utiliser en toute sécuritéLa manipulation ou l'utilisation inadéquates de cet appareil peuvent causer des blessures oudes dommages matérie

Pour utiliser en toute sécurité10 L'utilisation incorrecte peut causer des blessures ATTENTIONS'assurer de suivre les procédures d'uti

Pour utiliser en toute sécurité11 ATTENTIONBrancher à une prise électrique conforme aux caractéristiques de cet appareil (ten-sion, fréquence et cour

Pour utiliser en toute sécurité12 ATTENTIONNe jamais placer d'objet inammable à proximité de l'appareil. Ne jamais utiliser de produit in

Pour utiliser en toute sécurité13 Remarques importantes à propos du câble d'alimentation, de la che et de la prise électriqueNe jamais dépo

Pour utiliser en toute sécurité14 L'encre, les liquides nettoyants et les liquidesusées sont inammables et toxiques PRUDENCES'assurer que

Pour utiliser en toute sécurité15 Le poids brut maximum de cette machine atteint 300 kg ( 661 Ib.)Le poids du support est de 40 kg ( 88 Ib.) ATTENTIO

Pour utiliser en toute sécurité16Des vignettes d'avertissement sont apposées pour qu'il soit facile de repérer les zones dangereuses. La si

Setup Guide17

Thank you very much for purchasing this product. To ensure correct and safe usage with a full understanding of this product's performance, pleas

181. Installation EnvironmentDeciding On an Installation SiteInstall in a quiet, stable location oering good operating conditions. An unsuitable loca

1. Installation Enviroment19Temperature and HumidityMaintain the specied temperature and humidity even when the machine is not in use. If temperature

202. Included ItemsThe following items are packed together with the unit. Make sure they are all present and accounted for.Stay (1)Dancer roller (1) S

2. Included Items21Head-unit tool (1) Blade (1)Blade holder / Pin( one of each )Replacement blades forseparating knife (1)SOL INK cleaning cartridges(

223. Assembling and InstallingStep 1 : Assemble the StandWARNING Perform this task with all power switches left switched off.Otherwise sudden movement

3. Assembling and Installing23 Loosely tighten the bolts in the 8 locations shown in the gure. Fully tighten all the loosely-tightened bolts. Lower

3. Assembling and Installing242.Attach the Rail Slider and the Arm to the Stand Legs.  Attach the arm to the rail slider. Secure the arm with the ar

3. Assembling and Installing253. Attach the dancer roller to the stand legs.Remove the packing material at the location shown in the gure. As sho

3. Assembling and Installing264.Attach the paper tube.Pull the dancer roller back toward you. Loosen the arm retaining screw. Set the paper tube on

3. Assembling and Installing27Step 2 : Mount the MachineWARNING Perform this task with all power switches left switched off.Otherwise sudden movement

1Contents ...1 To Ensure Safe Use ...

3. Assembling and Installing28Step 3 : Installing the Media HolderWARNING Perform this task with all power switches left switched off.Otherwise sudde

3. Assembling and Installing29 Pass the media holder (right) through the front shaft.Pass it through from the right edge (as seen from the back of

3. Assembling and Installing30Step 4 : Install the Drain BottleWARNING Perform this task with all power switches left switched off.Otherwise sudden m

3. Assembling and Installing31wFrom the back of the machine, attach the drain bottle.At the location shown in the gure, secure in place the part y

3. Assembling and Installing32Step 5 : Attach the Ink-cartridge TrayWARNING Perform this task with all power switches left switched off.Otherwise sud

3. Assembling and Installing33Step 6 : Remove the Packing MaterialsTape and other packing materials are attached to the machine to protect it from vi

3. Assembling and Installing34wMount and store the retainer A under this machine.The retainer A is needed when transporting this machine.Close the f

354. Connecting the CablesConnecting the Cable of the Take-up UnitPass the take-up unit cable through at the locations shown in the gure, and connect

4. Connecting the Cables36Connecting the Power Cable and the Network CableWARNING Connect to electrical outlet that complies with this machine's

375. Installing the Ink CartridgesFilling with Ink for the First TimeSpecial procedures are required when installing ink cartridges for the rst time.

2 To Ensure Safe UseImproper handling or operation of this machine may result in injury or damage to property. Points which must be observed to preven

5. Installing the Ink Cartridges38CAUTION Never insert your hand or ngers into the opening of the front cover.The print heads move at high speed insi

5. Installing the Ink Cartridges392.Select the Ink Type.Press or .vUse to select Ink Type.Select the ink type according to the ink colors to be used

5. Installing the Ink Cartridges403.Perform cleaning with a cleaning stick.When the screen shown on the left appears, open the cover R.Remove the scr

5. Installing the Ink Cartridges414.Clean the print heads with the SOL INK cleaning cartridges.Insert SOL INK cleaning cartridges into slots 1 and 2.

5. Installing the Ink Cartridges42zWhen the screen shown on the left appears, detach the bottle, discard the discharged uid to empty it. CAUTION Be

5. Installing the Ink Cartridges43xPull out the dummy cartridges from slot 1 to 6.Press .yInsert the ink cartridge for each color.6.Cleaning the prin

5. Installing the Ink Cartridges44vWhen the screen shown to the left appears and the buzzer sounds twice, rotate the hexagon wrench in the direction o

456. Installing the BladeCAUTION Be sure to perform operations as specied by these instructions, and never touch any area not specied in the instr

6. Installing the Blade463.Install the blade holder.Loosen the screw of cutting carriage.vSupport the screw from below and insert the blade holder.I

477. Network SettingsIntroductionThis machine has a built-in print server as a network interface. When you use the print server, you can send output d

To Ensure Safe Use3 Incorrect operation may cause injury WARNINGBe sure to follow the operation proce-dures described in this documentation. Never al

7. Network Settings48Click [Properties].Click [Allow] when the [User Account Control] dialog box appears.The [Local Area Connection Properties] dialo

7. Network Settings49Step 2 : Make the Network Settings on the PrinterImportantThe addresses used in this section are merely example settings. For det

7. Network Settings50Use to select the address number.[SUBNET MASK] : 255.255.255.000Note: For the subnet mask, make the setting the same value as t

7. Network Settings51Step 3 : Make the Port Settings for the Software RIPThe settings for the software RIP will be made here. For the output destinati

528. When Not in Use for a Prolonged PeriodKeep Performing MaintenanceSwitch on the power once every month.Switch on the sub power once every month. W

539. When Moving the UnitProcedures from Preparing to Move Through ReinstallingTo move the machine, you must completely drain all ink inside the machi

9. When Moving the Unit54Insert and remove respective cartridges following the on-screen instructions.When the screen shown on the left appears, dis

9. When Moving the Unit553.Immediately move the machine and ll it with ink.Once the preparations are complete, move the machine with as little delay

56

To Ensure Safe Use4 WARNINGConnect to an electrical outlet that com-plies with this machine's ratings (for voltage, frequency, and current).Inco

R1-120905

To Ensure Safe Use5Never place any object on top or subject to damage.Never bend or twist with undue force.Never pull with undue force.Never bundle,

To Ensure Safe Use6 Ink, cleaning uid, and discharged uid are ammable and toxic In the event of ingestion or physical distress In the event of co

To Ensure Safe Use7 The total maximum weight of this machine reaches 300 kg ( 661 lb.)Media weighs 40 kg ( 88 lb.) WARNINGInstall the machine in a lo