Roland LEC-540 Guide d'installation télécharger pdf (Page 54)

7. Network Settings

Click [Properties].

If you're using Windows Vista click [Allow] when the

[User Account Control] dialog box appears.

The [Local Area Connection Properties] dialog box will appear.



Select [Internet Protocol Version 4 (TCP/IPv4)] (Win-

dows Vista/7) or [Internet Protocol (TCP/IP) (Windows

XP/2000), and then click [Properties].

If the check box for [Internet Protocol] is unselected, then click

and check the box.



Select [Use the following IP address]. Enter the infor-

mation as shown below, and then [OK].

[IP Address]:192.168.0.XXX

[Subnet Mask]:255.255.255.0

Note: Here, "XXX" can be any number between 1 and 254.

However, be sure to avoid the numbers overlapping with those

for other computers or devices. Here, as an example, enter

"192.168.0.101" for the IP address and "255.255.255.0" for the

subnet mask.



Click [OK] in the [Local Area Connection Properties] dialog box, and then click [Close]

in the [Local Area Connection Status] dialog box.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 63 64

Pas de commentaire

Roland LEC-540 Guide d'installation Page 54