Roland LEC-540 Guide d'installation télécharger pdf (Page 43)

5. Installing the Ink Cartridges

Ink Mode

For LEC-540, the ink mode must be selected based on the types of ink to be used.

 P. 43 "Selecting the Ink Mode"

 ECO-UV gloss/gloss mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.

 ECO-UV white/white mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.

 ECO-UV gloss/white mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and one

white ink cartridge.

 ECO-UVS ink mode

This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.

Filling with Ink for the First Time

When installing ink cartridges for the rst time, clean the print heads with the cleaning solution, and then ll

with ink of each color. This operation requires four SOL INK cleaning cartridges.

*For SOL INK cartridges and ink cartridges, be sure to use new ones.

*Never, under any circumstances, use anything other than the specied type of ink or cleaning uid.

* You can switch the ink type after lling with ink although there are some restrictions. See “Switching the Ink

Type” in User’s Manual for more information.

Afxing the Cartridge-slot Labels

Procedure



Open the ink cartridge cover.

Hold the knob.

Knob

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 63 64

Pas de commentaire

Roland LEC-540 Guide d'installation Page 43