Roland UA-11 Manuel du propriétaire télécharger pdf (Page 19)

Connections and Settings

Recording

You can use your DAW software to record audio from the INPUT 1 jack and INPUT 2 jack. When a

device is connected to the INPUT 1 jack or to the INPUT 2 jack, set the [PHANTOM] switch (p. 9) and

the [INST] switch (p. 9) accordingly.

Example

When a guitar is connected to the INPUT 1 jack, set the

[INST] switch to “Hi-Z.”

When a condenser microphone is connected to the

INPUT 2 jack, set the [PHANTOM] switch to “+48V.”

Front panel Rear panel

Guitar Condenser microphone

Computer

* To prevent malfunction and equipment failure, always turn down the volume and turn o all

devices (except the computer) before making any connections.

* Acoustical feedback (howling) could be produced depending on the location of microphones

relative to speakers. This can be remedied by:

• Changing the orientation of the microphone(s).

• Relocating microphone(s) at a greater distance from speakers.

• Lowering volume levels.

Adjusting the Input Level

Use the [SENS 1] knob and the [SENS 2] knob to adjust the input

level so that the PEAK indicator does not light.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 47 48

Pas de commentaire

Roland UA-11 Manuel du propriétaire Page 19