Roland SJ-740 Manuel d'utilisateur télécharger pdf (Page 28)

Chapter 2 Operation

2-1 Switching the Power On and Off

Switching the Power On and Off

This machine has a main power switch and a sub power switch. Switch on both to use the machine.

Whenever printing is finished, switch off the sub power. You also flip down the loading lever to the rear of the ma-

chine.

Leave the main power switch

➀ on at all times, never switching it off. Leaving it on activates the alarm feature.

☞ P. 64, "Alarm Feature"

WARNING

When printing is not being performed, remove any loaded media or switch off the

power.

The continued application of heat at a single location may cause the release of toxic gases

from the media or pose a fire hazard.

Important Note on Switching Off the Power

Never switch off the main power or unplug the power cord

suddenly while operation is in progress. Doing so may dam-

age the print heads. Be sure to first switch off the sub power.

If the main power is accidentally switched off, immediately

turn the power back on.



 Sub power switch



 Main power switch

Back of the printer Front of the printer

Turn this switch on after

closing the front cover.

To turn it off, hold down

the switch for one

second or longer.

Be sure to leave

switched on at

all times.

Flip the loading lever down

to the rear when not in use.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 127 128

Pas de commentaire

Roland SJ-740 Manuel d'utilisateur Page 28