Roland SJ-740 Manuel d'utilisateur Page 124
- Page / 128
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
122
Chapter 7 Specifications
7-4 Specifications
80
55
35
15 27 32
Humidity
20
(%)
°C (°F)
(no condensation)
Temperature
(
59
)(
90
)(
81
)(
68
)
0
Use in an operating environment
with this range.
*1
The length of printing is subject to the limitations of the program.
*2
➢With Roland PET film, print travel: 1 m
➢Temperature: 25°C (77°F), humidity: 50%
*3
Not assured when the print heater or dryer is used.
*4
➢ Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment.
➢ Depending on the ambient temperature and media width, the preset temperature may fail to be reached.
*5
Operating environment
XJ-740
Piezoelectric inkjet
210 to 1,879 mm
(8.3 to 74 in.)
Maximum 1.0 mm (39 mil) with liner
Maximum 210 mm (8.3 in.)
Maximum 47 kg (103 lb.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Maximum 1,869 mm
(73.6 in.)
220-cc cartridge / 440-cc cartridge
6 colors (cyan, magenta, yellow, black, light-cyan, and light-magenta) or
4 colors (cyan, magenta, yellow, and black)
Maximum 1,440 dpi
Error of less than ±0.3% of distance traveled, or ± 0.3 mm, whichever is greater
Preheater and print heater, setting range for the preset temperature: 30 to
50°C (86 to 122°F)
Dryer, setting range for the preset temperature: 30 to 55°C (86 to 130°F)
Maximum 250 mm (9.8 in.)
Maximum 50 kg (110 lb.)
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Automatic sleep feature
AC 100 to 120 V ±10%, 13 A, 50/60 Hz or AC 220 to 240 V ±10%, 7 A, 50/60 Hz
Approx. 1,600 W
Approx. 47 W
64 dB (A) or less (according to ISO 7779)
45 dB (A) or less (according to ISO 7779)
3,169 (W) x 1,103 (D) x
1,260 (H) mm
(124.8 (W) x 43.4 (D) x
49.6 (H) in.)
225 kg (495 lb.)
Temperature: 15 to 32ºC (59 to 90ºF) (20ºC [68ºF] or more recommended),
humidity: 35 to 80%RH (non-condensing)
Temperature: 5 to 40˚C (41 to 104˚F), humidity: 20 to 80%RH (non-condensing)
Exclusive stands, power cord, media clamps, media flanges, replacement blade
for separating knife, cleaning kit, software RIP, User's Manual, etc.
Printing technology
Media Width
Thickness
Roll outer diameter
Roll weight
Core diameter
Printing width (*1)
Ink cartridges Types
Colors
Printing resolution (dots per inch)
Distance accuracy (*2) (*3)
Media heating system (*4)
Media take-up
Roll outer diameter
system
Roll weight
Connectivity
Power-saving function
Power requirements
Power consumption
During operation
Sleep mode
Acoustic noise level
During operation
During standby
Dimensions (with stand)
Weight (with stand)
Environmental Power on (*5)
Power off
Accessories
XJ-640
210 to 1,625 mm
(8.3 to 64 in.)
Maximum 40 kg (88 lb.)
Maximum 1,615 mm
(63.6 in.)
2,948 (W) x 1,103 (D) x
1,260 (H) mm
(116 (W) x 43.4 (D) x
49.6 (H) in.)
213 kg (469 lb.)
XJ-540
210 to 1,371 mm
(8.3 to 54 in.)
Maximum 30 kg (66 lb.)
Maximum 1,361 mm
(53.6 in)
2,694(W) x 1,103 (D) x
1,260 (H) mm
(106 (W) x 43.4 (D) x
49.6 (H) in.)
200 kg (440 lb.)
- USER'S MANUAL 1
- For the USA 2
- For Canada 2
- Contents 3
- To Ensure Safe Use 6
- Warning Labels 12
- Avis sur les avertissements 13
- ATTENTION 13
- PRUDENCE 13
- À propos des symboles 13
- Printer unit 20
- Ink cartridges 20
- Chapter 1 21
- Introduction 21
- 1-1 Features of the Machine 22
- 1-2 Part Names and Functions 23
- Chapter 1 Introduction 24
- Operation Panel 25
- Media Take-up System 26
- Chapter 2 27
- Operation 27
- Sub power switch 28
- The Power-saving Feature 29
- Usable Media 30
- Loading Media 30
- Chapter 2 Operation 31
- OK Not OK 33
- Attach the media clamps 34
- Close the front cover 34
- How to Cut Off Media 35
- Procedure 36
- General Guide for Adjustment 37
- 2-4 Starting Printing 38
- Printing Tests and Cleaning 39
- 2-5 If Ink Runs Out 41
- Chapter 3 45
- Operation of the Media 45
- Take-up System 45
- 3-1 The Take-up System 46
- 3-2 Using the Take-up System 47
- Removing Taken-up Media 50
- Chapter 4 51
- Maintenance and Adjustment 51
- Disposing of Discharged Ink 52
- Cleaning 54
- Daily Care and Maintenance 55
- Periodic Care and Maintenance 55
- Start cleaning 56
- How to Perform Cleaning 58
- Maintenance cover 59
- Replacing the Wipers 62
- Replace the separating knife 64
- MAINTENANCE 65
- REPLACE KNIFE 65
- W 1839mm 65
- SETUP SHEET 65
- ROLL 65
- Keep Performing Maintenance 66
- Alarm Feature 66
- 4-6 When Moving the Unit 67
- Chapter 5 69
- Feature Reference 69
- Description 70
- Using Transparent Media 73
- Printing Hard-to-dry Media 75
- Using Sticky Media 77
- How to Load Sheet Media 78
- Changing the Type of Ink 79
- Deactivating the Sleep Mode 80
- Print a test pattern 84
- Chapter 5 Feature Reference 86
- Menu item Page to see 92
- Loading a Saved Preset 93
- Assigning a Name to a Preset 93
- Printing a System Report 96
- Viewing the Network Settings 97
- 5-11 Performing Maintenance 98
- 5-12 Menu List 100
- 12 Menu List 101
- Chapter 5 Feature Reference 101
- Language and Unit Menu 105
- Cleaning Menu 105
- Heater Configuration Menu 105
- Chapter 6 107
- What to Do If 107
- Chapter 6 What to Do If 108
- Colors Are Unstable or Uneven 109
- 6-3 The Media Jams 111
- Media Wrinkles or Shrinks 113
- Media Feed Is Not Straight 113
- Media Feed Is Not Smooth 113
- What to Do First 114
- 6-7 If a Message Appears 115
- Chapter 7 119
- Specifications 119
- 7-1 Usable Media 120
- 7-2 Printing Area 121
- Chapter 7 Specifications 122
- 7-4 Specifications 124
- R1-070820 128
Produits connexes et manuels pour Imprimer et scanner Roland SJ-740
(31 pages)
(99 pages)
(97 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.179 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels