26
Parameter List
When used as a controller:
VELOCITY CURVE
(Same as TRIG 1–6)
This value becomes effective when Pedal Control is set to
or .
MIDI NOTE No.
(Same as TRIG 1–6)
This value becomes effective when Pedal Control is set to
or .
Trigger Parameters
TRIGGER INPUT: 1–6
With TRIG 2, you can make separate settings for the rim and
head. Other settings apply to both the head and rim.
THRESHOLD
0–15
This setting allows a trigger signal to be received only when
the pad is struck harder than a specified force. This can be
used to prevent a pad from sounding in response to
extraneous vibrations from another pad. In the following
example, B will sound but A and C will not sound.
fig.06-060
When set to a higher value, no sound is produced when the
pad is struck lightly.
Gradually raise the Threshold value while striking the pad.
Check this and adjust accordingly. Repeat this process until
you get the perfect setting for your playing style.
SENSITIVITY
1–16
Adjust the Sensitivity of the pad to regulate the pad response.
Higher settings result in higher sensitivity, so that the pad will
produce a loud volume even when struck softly.
When you strike the pad, the strength with which the pad is
struck (velocity) is shown in the display on a six-level scale.
Striking the pad forcefully sets velocity at a value of 127.
fig.06-061
Displayed Parameter
Control Change
Channel Aftertouch
Pitch bend down
Pitch bend up
–
–
Threshold
CBA
Strength
of Striking
Hard
Soft
Velocity
127
100–126
75–99
25–49
1–24
50–74
Commentaires sur ces manuels