Roland FR-1xb Manuel du propriétaire télécharger pdf (Page 11)

Setting up

V-Accordion

ENGLISH ENGLISH

4. Setting up

Connections

The FR-1 has a compartment for 8 optional rechargeable Ni-MH (AA-type) batteries. Consider purchasing such batteries when per-

forming on stage.

Using the OUTPUT sockets

The FR-1 needs to be connected to an

amplification system. If you are using

optional batteries and need to connect the

FR-1 to a PA system or mixer, we recom-

mend using a wireless system to avoid hav-

ing to use excessively long signal cables.

You can also use the supplied earphones or

a pair of optional headphones (Roland

RH-30A, RH-200, RH-200S or RH-300).

Note: To prevent malfunction and/or damage to

speakers or other devices, always turn down the

volume, and turn off the power on all devices before

making any connections.

Note: When using the supplied earphones, do not

set the volume too high (i.e. past “12 o’clock”) to

avoid distortion.

Attaching the straps

Proceed as follows to attach the straps to your FR-1:

(1) Unpack the straps.

(2) Put the FR-1 on a stable surface.

The connection panel must face down.

(3) Slide the upper end of one strap through the holder ring

(see the illustration).

The upper end is the part with the Velcro portions and the

clip.

(4) Fasten the strap’s upper part to the Velcro layer below it.

(5) Close the security clip to ensure that the strap cannot

come loose.

(6) Repeat steps (3)~(5) for the other strap.

The upper strap ends should look as follows:

(7) Turn the FR-1 around (with the connection panel on the

left side, see below).

OUTPUT

L/MONO + R/MONO

INPUT

L + R

Use either a long signal cable (10m or more) or an optional wireless system (recommended).

To a wall outlet

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Roland FR-1xb Manuel du propriétaire Page 11

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Roland FR-1xb