Roland GR-20 Manuel du propriétaire télécharger pdf (Page 26)

Chapter 4 Other Functions

Changing the function of the

foot pedals (SW MODE)

You can change the function of the GLIDE pedal and the

HOLD pedal by changing the switch mode. This setting also

changes the function of your GK pickup's DOWN/S1 screen

and UP/S2 switch.

Switch Mode 1

The GLIDE pedal operates the Glide function, and the HOLD

pedal operates the Hold function.

Your GK pickup's UP/S2 switch and DOWN/S1 switch will

move up/down through the patches.

* This mode is selected when the GR-20 is shipped from the

factory.

Switch Mode 2

The HOLD pedal and GLIDE pedal will move up/down

through the patches.

You can use your GK pickup's DOWN/S1 switch and UP/S1

switch in conjunction with the pedals to perform the

following operations.

• When you press the DOWN/S1 switch, the GLIDE pedal

will function as Octave Down and the HOLD pedal will

function as Octave Up (TRANSPOSE).

When you press DOWN/S1 (or UP/S2) once again, the

pedals will revert to the patch up/down function.

• When you press the UP/S2 switch, the GLIDE pedal will

function as Glide and the HOLD pedal will function as

Hold.

When you press UP/S2 (or DOWN/S1) once again, the

pedals will revert to the patch up/down function.

1. Press the [SYSTEM EDIT] button enough times to get the

SW MODE indicator to light.

2. Use the NUMBER/VALUE knob to change the setting.

* The actual mode of operation will not change until you store

the setting and return to Play mode.

3. Press the [EXIT] button.

You will return to Play mode, and the setting will be

stored.

* The decimal point in the display will blink while the setting is

being stored. Don't turn off the power during this time.

* The setting will not be stored if you turn off the power without

returning to Play mode.

* In Switch Mode 1, the GLIDE indicator and HOLD indicator

will normally be lit; they will blink only while you press the

pedal.

* In Switch Mode 2, the GLIDE indicator and HOLD indicator

will normally be unlit; however, when the function of each

pedal is being changed by pressing the DOWN/S1 switch or

UP/S2 switch, the indicators will behave the same way as they

do in Switch Mode 1.

Saving Patches and System

Parameter Settings on an

External Device (BULK DUMP)

Here’s how you can save the user bank patches and the

system parameter settings via MIDI on an external device or

computer (sequencer).

You can also transfer data via a MIDI cable directly between

two GR-20 units.

Sending GR-20 data in this way is called “bulk dump,” and

receiving this data is called “bulk load.”

What are System Parameters?

Parameters that apply to the entire GR-20 (such as SW

MODE and MIDI CH) are called “system parameters.”

1. Connect the GR-20’s MIDI OUT to your external device’s

MIDI IN.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Roland GR-20 Manuel du propriétaire Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Guitares Roland GR-20