Roland GR-20 Manuel du propriétaire télécharger pdf (Page 18)

Chapter 2 Using the GR-20 with Guitar Effects

Switching between the Synth

Sound and Guitar Sound

To switch between the synth sound and guitar sound, use the

selector switch provided on your GK pickup.

If the selector of your GK pickup (e.g., GK-3, GK-2A) is set to

the GK position (labeled SYNTH on the GK-2A), the synth

sound will be output. If set to the GUITAR position, the

guitar sound will be output. If the selector is set to MIX, both

sounds will be mixed and output.

* To adjust the volume balance between the synth sound and

guitar sound, use the volume (p. 20) of each patch to adjust the

synth sound, and the volume of the guitar or the connected

effects device to adjust the volume of the guitar sound.

Using the GR-20 with a

Multi-effects Unit

By connecting your multi-effects unit via MIDI, you can

automatically change sounds (patches) on the GR-20 by

selecting sounds (patches) on your multi-effects unit.

Channel (CH)

MIDI uses “channels” to send independent streams of data

over a single cable. In order for data to be received, the

receiving device must be set to receive the channel that the

transmitting device is sending on. This means you must set

the transmit channel of your multi-effects unit to match the

receive channel of the GR-20.

1. Check the MIDI transmit channel of your multi-effects

unit.

For details, refer to the manual of your multi-effects unit.

2. Press the [SYSTEM EDIT] button a number of times until

the MIDI CH/PLAY FEEL indicator lights.

fig.2-03(MIDI CH)

3. Use the [NUMBER/VALUE] knob to change the setting.

Set the channel so it’s the same as the MIDI transmit

channel of your multi-effects unit.

4. Press the [EXIT] button.

The setting will be stored, and you will return to Play

mode.

* The decimal point in the display will blink while the setting is

being stored. Don't turn off the power during this time.

* If you turn off the power before returning to Play mode, the

setting you made will not be stored.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 51 52

Pas de commentaire

Roland GR-20 Manuel du propriétaire Page 18