Roland D Station Manuel d'utilisateur télécharger pdf (Page 7)

On page 4 is a diagram of the basic way to set up the DrumStation Rack. Normally the

setup should be as follows: If the Master Keyboard is a “Workstation” i.e. it has a

Synthesiser built in, turn “Local Off” or the equivalent in its MIDI setup. ( Refer to the manu-

facturers Owners Manual for details on how to do this. ) Turn the Computer

Software/Sequencer’s “Soft Thru” (or sometimes called “Echo Back”) to the “ON” or “Enabled” position. Now when selecting

a “Track” in the Computer Software/Sequencer that is assigned to the MIDI RX channel of the Drumstation, (Refer: Page

11) playing the keyboard should play the Drumstation through the Headphones/Monitors. Similarly “Tracks” in the Computer

Software/Sequencer that are assigned to the MIDI channel(s) of the “Workstation” should make it produce sound. If not

please refer to the Keyboard & Computer Software/Sequencer manufacturers Owners Manuals for details on how to do

this.

Note:This setup does not allow the recording of knob movements on the Computer Software/Sequencer. This is because

the MIDI output of the DrumStation is not connected to the input of the Sequencer/Computer. To record Knob movements in

realtime refer Advanced Setup on page 6.

Note: If there are additional Keyboards/Modules connected via MIDI as shown, this diagram does not include audio for the

Keyboard/Module. The audio outputs of these devices must also be connected to the mixer.

Applications

Basic

1 2 3 4 5 6 7 8 9 10 11 12 ... 53 54

Pas de commentaire

Roland D Station Manuel d'utilisateur Page 7