Roland AX-Synth Manuel d'utilisateur télécharger pdf (Page 32)

Using the AX-Synth’s USB port

Making the settings for the USB

driver

For successful USB communication, you need to specify

the USB driver you want to use, and then activate that

driver.

(1) Hold down the [SHIFT] button and press PGM

CHANGE [INC].

The display now shows the name of the driver that is

currently active (“Gen” or “Uen”) and the [WRITE]

button flashes.

(2) Keep holding the [SHIFT] button and press the PGM

CHANGE [INC] button to switch between “Gen” or

“Uen”.

(3) Press the [WRITE] button to confirm your selection.

(4) Release the [SHIFT] button.

(5) Switch the AX-Synth off, wait a few seconds, then

switch it on again.

Uen Select this if you use the supplied driver.

Gen Select this if you use a generic USB driver

included with the OS.

AX-Synth_e2 Page 32 Monday, October 12, 2009 3:41 PM

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

Pas de commentaire

Roland AX-Synth Manuel d'utilisateur Page 32