Roland ATELIER Combo AT-350C Manuel d'utilisateur télécharger pdf (Page 37)

Performing

Transpose the Pitch in Octave Units (Octave Shift)

The pitch of the sound played by the keyboard can be adjusted in one-octave steps. This function is called “Octave Shift.”

You can individually specify Octave Shift for each of the following parts.

• Upper Organ part

• Upper Orchestral part

• Lower part

• Pedal part

• Solo part

1. Press the [Utility] button.

2. Press the Menu [

] [ ] buttons to select “Octave Shift.”

3. Press the [Utility] button.

4. Use the Menu [

] [ ] buttons to select a Part to which you wish to apply an Octave Shift.

Part Upper Organ, Upper Orch, Lower, Pedal, Solo

5. Use the Value [-] [+] buttons to set the amount of shift.

The value can be set to a range of +/- 3 octaves.

To return to the basic screen, press the [Display/Exit] button a number of times.

MEMO

By holding down the [Utility] button and using the Menu [ ] [ ] buttons, you can jump to editing screens for the reverb eect (p. 41) and sustain

eect (p. 40) of the same part.

* Please note that when you apply the Octave Shift function to certain voices, their pitch could be stretched beyond their recommended note

ranges, and they may not sound as expected. Care should be taken when using Octave Shift.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 131 132

Pas de commentaire

Roland ATELIER Combo AT-350C Manuel d'utilisateur Page 37