Roland Metaza MPX-80 Manuel d'utilisateur télécharger pdf (Page 93)

Chapter 5 Maintenance and Adjustment

5-2 Adjusting the Marking Pin

Adjusting the Striking Force of the Pin

You can adjust the striking force of the pin by using MPX-90 Head Manager. Pin adjustment involves striking

the pattern shown in the gure. Prepare a piece of test-use printing material (brass) or other material measur-

ing about 60 mm (2.3 in.) by 60 mm (2.3 in.).

Procedure



From [Start] menu, click [All Programs] (or [Programs]) → [MPX-90 Head Manager] →

[MPX-90 Head Manager].

MPX-90 Head Manager starts.



Switch on the power to the machine.

 P. 30, "Switching On the Power"



Click [Readjust Pin].

Follow the on-screen instructions to

perform adjustment for the pin.

Set a material using the adhesive sheet

and table.

 P. 36, "Loading Material Using the Adhesive

Sheet"

Print the adjustment pattern using the

head cap.

 P. 36, "Loading Material Using the Adhesive

Sheet"

If the adjustment pattern fails to be

printed, see the sections given below.

 P. 104, "The printed location isn't where

desired," p. 105, "Striking is performed, but

nothing is printed"



When you have finished, click

The window closes.

Adjustment

pattern

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 119 120

Pas de commentaire

Roland Metaza MPX-80 Manuel d'utilisateur Page 93