Roland LEC-330 Guide d'installation télécharger pdf (Page 49)

6. Installing the Ink Cartridges (LEC-330)

Clean the print heads using the SOL INK cleaning cartridge.



Make sure the selected ink mode is enabled.

[ ECO-UV CMYKWW ]: Cyan, magenta, yellow, black, white,

white

[ ECO-UV CMYKGlGl ]: Cyan, magenta, yellow, black, gloss,

gloss

[ ECO-UV CMYKGlW ]: Cyan, magenta, yellow, black, gloss,

white

If an incorrect ink mode is enabled, switch off the

sub power.

Again carry out the procedure on page 43, "Selecting the Ink

Mode."

If the selected ink mode is enabled, press .



Make sure the drain bottle is installed.

Press



Insert cleaning cartridges into slots 1, 2, 3, and 4.



 Pull out the cleaning cartridges.

 Insert the cleaning cartridges YOU PULLED OUT

into slots 5 and 6.

SELECT INK TYPE

ECO‑UV C M Y K Gl W

INSTALL

DRAIN BOTTLE

SET CL-LIQUID

1 2 3 4

FILLING INK...

REMOVE CL-LIQUID

1 2 3 4

SET CL-LIQUID

5 6

FILLING INK...

>>>>

Ink mode

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 67 68

Pas de commentaire

Roland LEC-330 Guide d'installation Page 49