Roland RM-700 Manuel d'utilisateur télécharger pdf (Page 24)

Before You Start Playing

You can connect a microphone to the Mic jack, and enjoy sing-

alongs or tell a story while you play.

Connect a microphone (sold separately) to the Mic jack

on the lower-left area of the instrument.

Rotate the [Mic Volume] knob on left side of the Mic jack

to adjust the volume level for the microphone.

Some Notes on Using a Microphone

• Be careful of high volume levels when using microphone late at

night or early in the morning.

• When connecting a microphone to the RM-700, be sure to lower the

volume. If the volume control is too high when the microphone is

plugged in, noise may be produced by the speakers.

• Howling could be produced depending on the location of

microphones relative to speakers. This can be remedied by:

• Changing the orientation of the microphone.

• Relocating microphone(s) at a greater distance from speakers.

• Lowering volume levels.

You can connect a separately available CD drive (CD-01A) and play

back music CDs or CD-ROMs containing SMF music data. You can

also write songs for which the audio has been recorded to a CD to

create a music CD.

You can also play songs on VIMA TUNES (VIMA CD-ROMs) sold

by Roland.

Turn the CD drive’s power “AUTO.”

Use the screws (3 x 8 mm) to attach the holders to the CD

drive.

As shown in the illustration, fasten the CD drive using the

screws (4 x 16 mm) and the screw holes located on the

bottom of the RM-700.

Connecting a Microphone

Connecting a CD Drive

Attaching a CD Drive

Screws (3 x 8 mm)

Screws (4 x 16 mm)

RM-700_e.book 25 ページ２００９年３月１８日　水曜日　午前１１時５分

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 237 238

Pas de commentaire

Roland RM-700 Manuel d'utilisateur Page 24