Roland Metaza MPX-90M Manuel d'utilisateur télécharger pdf (Page 42)

2-2 Starting Printing

Chapter 2 Printing

Load the instrument to be imprinted on the table.

When using the vise, go to P. 37.



Set the table.

Place the table by aligning it with the frame on the unit. When the tabs on the bottom of the table t into

the holes on the unit, this completes setting of the table.



Afx the adhesive sheet for table to the

table.

Place the adhesive sheet straight inside the table

frame by aligning it with the scale marks. Be careful

not to allow any air bubbles to form between the

table and adhesive sheet.



Press the laser pointer button.

The laser pointer is irradiated.

If the machine is idle for 5 minutes, the laser pointer

is automatically turned o.

 If the adhesive force has been educed, then

wash the adhesive sheet.

☞ P. 48, "Cleaning the Adhesive Sheet"

 Never rub the surface with force. Doing so

may damage the surface and reduce its

adhesive strength.

Table

Adhesive sheet for table

Table

Laser pointer button

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 91 92

Pas de commentaire

Roland Metaza MPX-90M Manuel d'utilisateur Page 42