Roland MV-8800 Manuel du propriétaire Page 173

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 244
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 172
SYSTEM
S-173
MV-8800 Screen Guide
SYSTEM
DISK/USB MASTERING SAMPLING IMPORT EFFECTS MIXER
GLOBAL screen
Here you can make settings for the overall system of the MV-8800.
To access this screen
[SYSTEM]
move the cursor to the upper row of
icons
[F1](Global)
Explanation of each area
Input Select
Selects the input source for sampling or recording.
Sampler Output Gain
Adjusts the level (volume) at which the sample will play.
Range: -12,
-9
, -6, -3, 0 dB
Digital Output Select
Selects the audio signal that will be output from the
DIGITAL output jack.
Digital Out Copy Protect
Allows you to prohibit subsequent digital copying from
media that you digitally recorded from the MV-8800 onto
a digitally-connected MD recorder or similar device.
Master Tune
Adjusts the overall tuning of the MV-8800. The displayed
value is the frequency of the A4 key (middle A).
Range: 415.3–
440.0
–466.2
If an audio event whose BPM Sync parameter is Off has
been recorded on an audio track, adjusting the Master
Tune parameter will cause the playback timing to drift.
Preview Length
Specifies the playing time for Preview Playback (PREVIEW
[TO ( )] / [FROM( )]) in steps of 0.1 seconds.
Range: 0.1–
1.0
–10.0 sec
HD Format Protect
Protects the hard disk from being formatted. When the
power is turned on, this setting will automatically be On.
Power Up Mode
Selects the mode in which the sequencer will be at
power-up.
Value
Sampling source
Analog
Analog input jack (stereo)
Analog(L+R) ANALOG INPUT jack (Lch and Rch mixed to
monaural)
Analog(L) ANALOG INPUT jack (Lch only, monaural)
Value
Output signal
Master
The same signal as the Master output will be output.
MLT1/2 The multi output bus 1/2 signal will be output.
: :
MLT7/8 The multi output bus 7/8 signal will be output.
Value
Explanation
Off
The digital output jack will output a signal without
copy-protect flags.
On The digital output jack will output a signal with
copy-protect flags. It will not be possible to copy this
data from the recorded media via a digital connection
onto an MD or DAT.
Value
Explanation
Off
It will be possible to format the hard disk. Turn this
parameter Off if you want to format the hard disk.
On
It will not be possible to format the hard disk. When
the power is turned on, this setting will be On.
Value Explanation
Song
At power-up, the sequencer will be in Song mode.
(The SONG screen will appear.)
Pattern
At power-up, the sequencer will be in Pattern mode.
(The PATTERN screen will appear.)
MV-8800_r_e.book 173 ページ 2006年11月10日 金曜日 午後12時49分
Vue de la page 172
1 2 ... 168 169 170 171 172 173 174 175 176 177 178 ... 243 244

Commentaires sur ces manuels

Pas de commentaire