Roland MC-909 Manuel d'utilisateur télécharger pdf (Page 106)

106

Multi-Effects List

43: MULTI TAP DELAY

(MFX2 only)

This effect provides four delays. Each of the Delay Time parameters

can be set to a note length based on the selected tempo. You can also

set the panning and level of each delay sound.

fig.MFX43

44: REVERSE DELAY

(MFX2 only)

Adds the reverse of the input sound as a delay.

fig.MFX44

45: SHUFFLE DELAY

(MFX2 only)

Adds a shuffle to the delay sound, giving the sound a bouncy delay

effect with a swing feel.

fig.MFX45

Parameter

Value Description

Delay 1–4

0–4000 ms,

note

Adjusts the time until Delays 1–4

are heard.

Pan 1–4 L64–63R Stereo location of Delays 1–4

Level 1–4 0–127 Output level of Delays 1–4

Feedback

-98– +98 %

Adjusts the amount of the delay

sound that’s fed back into the effect.

Negative (-) settings invert the phase.

HF Damp 200–8000

Hz, BY-

PASS

Adjusts the frequency above which

sound fed back to the effect is fil-

tered out. If you don’t want to filter

out any the high frequencies, set

this parameter to BYPASS.

Low Gain -15– +15 dB Gain of the low frequency range

High Gain -15– +15 dB Gain of the high frequency range

Balance #2 D100:0W–

D0:100W

Volume balance between the direct

sound (D) and the effect sound (W)

Level 0–127 Output level

Parameter

Value Description

Threshold

0–127 Volume level at which the reverse

delay begins

Delay 1–4 0-2000 ms,

note

Adjusts the time until Delays 1–4

are heard.

Feedback 1

-98– +98 %

Adjusts the amount of the delay

sound that’s fed back into the effect.

Negative (-) settings invert the phase.

Feedback 4

HF Damp 1 200–8000

Hz, BY-

PASS

Adjusts the frequency above which

sound fed back to the effect is fil-

tered out. If you do not want to filter

out any high frequencies, set this

parameter to BYPASS.

HF Damp 4

Pan 1–3 L64–63R Stereo location of Delays 1–3 sound

Level 1–3 0–127 Output level of Delays 1–3 sound

Balance #2 D100:0W–

D0:100W

Volume balance between the direct

sound (D) and the effect sound (W)

Low Gain -15– +15 dB Gain of the low frequency range

High Gain -15– +15 dB Gain of the high frequency range

Level 0–127 Output level

L in

R in

L out

R out

Multi Tap Delay

Balance W

Balance D

Balance W

Balance D

Delay 1

Delay 3

Delay 4

Delay 2

Feed

back

2-Band

Feedback 1

L in

R in

Rev. Delay

L out

R out

2-Band

Delay

Feedback 4

Parameter

Value Description

Delay #1

0–4000 ms,

note

Adjusts the time until the delay

sound is heard.

Shuffle

Rate

0–100 % Adjusts the ratio (as a percentage)

of the time that elapses before Delay

B sounds relative to the time that

elapses before the Delay A sounds.

When set to 100%, the delay

times are the same.

Pan A/B L64–63R Stereo location of Delay A/B

Level

Balance

A100:0B–

A0:100B

Volume balance between Delay A

and Delay B

Feedback

-98– +98 % Adjusts the amount of the delay

that’s fed back into the effect. Nega-

tive (-) settings invert the phase.

Accelera-

tion

0–15 Adjusts the time over which the De-

lay Time changes from the current

setting to its specified new setting.

HF Damp 200–8000

Hz, BY-

PASS

Adjusts the frequency above which

sound fed back to the effect is fil-

tered out. If you don’t want to filter

out any high frequencies, set this

parameter to BYPASS.

Low Gain -15– +15 dB Gain of the low frequency range

High Gain -15– +15 dB Gain of the high frequency range

Balance # D100:0W–

D0:100W

Volume balance between the direct

sound (D) and the effect sound (W)

Level 0–127 Output level

Feedback

L in

R in

Delay

L out

R out

2-Band

Delay A

Delay B

MC-909_Ref_e.book 106 ページ２００５年３月１日　火曜日　午後３時２９分

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 179 180

Commentaires sur ces manuels

Pas de commentaire

Roland MC-909 Manuel d'utilisateur Page 106

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Roland MC-909