Roland FR-7/FR-5 Manuel du propriétaire télécharger pdf (Page 59)

7.7 Name

V-Accordion

7.7 Name

This function allows you to

name the selected Set (8 char-

acters). It would be a good idea

to use the name of the instru-

ment you “built” using the TRE-

BLE, BASS, FREE BASS, etc., group parameters – or the

name of the Song you wish to use this Set for.

(1) Select the character position (indicated by a dark

square) by pressing [UP] (previous character),

[DOWN] (next character) or the [DATA÷ENTER] knob

(next character).

(2) Turn the [DATA÷ENTER] knob to select the desired

character.

• Press [UP] and [DOWN] simultaneously to erase the

currently selected character (it will become a space).

Example: To replace the period (“.”) in “Fr.Folk” with a

space (“Fr Folk”), position the cursor on the “.” and

simultaneously press [UP]/[DOWN].

• To insert insert a space before the currently selected

character and push all subsequent characters one

position to the right, select the character that should

follow the space, then press and hold [UP]. Example:

To insert a space after the “.” in “Fr.Folk” (creating the

name “Fr. Folk”), position the cursor on the second “F”

and hold down [UP] for a while.

Note: If the name already contains 8 characters (“Bandoneo”),

the last character is erased (example: “Band one”).

• To delete the character indicated by the cursor and

move subsequent characters one position to the left,

select it (example: “Fr.Folk”) and press and hold

[DOWN] (“FrFolk”).

7.8 Master Bar Recall

This parameter allows you to

choose the Treble register (1~

14) that can be activated by

pressing the Master bar. Note

that this is only possible while

the Treble section is in Solo mode (page 25) or while the

Orchestra part is set to “CANCEL”.

In all other cases (Dual, High, Low modes), the Master

bar is indeed used to mute the Orchestra part. And in

Solo mode, the first press allows you to return from the

Orchestra (if it’s on) to the Treble section.

7.9 Icon

This parameter allows you to

assign an icon to your Set,

which is displayed above its

name on the Main page. In most

cases, you will probably choose

a picture that somehow illustrates the contents of your

settings, but that is entirely up to you. The FR-7/FR-5

contains 40 preset icons (stored in its internal memory).

SYSTEM parameters

The SYSTEM group contains parameters that are related to all Sets and all sections: they apply to the

FR-7/FR-5 as a whole. See pages 35 and 37 for how to select and adjust the parameters.

Press [UP] and [DOWN] simultaneously to select the value that is indicated as “Default setting”.

Any changes you make can be saved even without

using the WRITE function (see p. 77). To avoid losing

your changes, it would be a good idea to take advan-

tage of the following automatic routine.

Whenever you press [EXIT÷JUMP] after editing a Menu

parameter, the FR-7/FR-5 asks you whether you want

to save your changes:

“YES” is selected by default. If you want to save your

changes, proceed as described below. (If you don’t, turn

the [DATA÷ENTER] knob to select “NO”, then press the

[DATA÷ENTER] knob.)

To save your changes:

(1) Press the [DATA÷ENTER] knob. The display now

responds with:

Note: The GLOBAL page shows all parameters that can be

saved to the Global memory (there is only one such memory):

the Master Tune and Scale Tune parameters of the TUNING

group (the Transpose setting is never saved) as well as the SYS-

TEM and MIDI groups.

(2) Press the [WRITE] button to save your changes. The

display briefly shows a confirmation:

Note: If you selected “NO”, the edited Global settings will be

used until you switch off the FR-7/FR-5 (or change them

again).

Saving your changes

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 93 94

Commentaires sur ces manuels

Pas de commentaire

Roland FR-7/FR-5 Manuel du propriétaire Page 59

Commentaires sur ces manuels

Produits connexes et manuels pour Instruments de musique Roland FR-7/FR-5