Roland PAINO DISCOVER5 Manuel d'utilisateur télécharger pdf (Page 52)

Working with the Mixer & using effects

More refined Mixer settings

“Mixing”, as you may know, entails a lot more than just getting the balances right. It also involves specifying the

stereo placement of sounds and the amount of effect that should be applied. So here we go…

(1) On the above display page, press the

[Keyboard≈Effect] field.

The display changes to:

The “Chorus Send” parameter of the Upper part

is not available when the [MULTI-FX] button

lights. In that case, the page above looks as fol-

lows:

Note: There are no “Keyboard Mixer” parameters for the

D Beam part. Moreover, this part is never processed by

any of the DisCover 5’s effects.

(2) Use the [PREV] and [NEXT] buttons to select

the parameter you wish to edit, and set the

desired value with the [VALUE] dial.

Parameter fields can also be selected by press-

ing them.

■ Reverb Send & Chorus Send: Use these parame-

ters to set the Reverb or Chorus send level (how

much effect should be applied to the part in ques-

tion). The effects themselves can be edited on the

Effect page (see below).

Note: The M.Drums parameters on this page apply to

the entire Drum Set and cannot be set for each drum/

percussion instrument individually (unlike the send

parameter of the song drum part).

■ PanPot: Use this parameter to set the stereo

placement of the selected part. “L63” corresponds to

hard left, “0” to dead center, and “R63” to hard right.

“Rnd” means that the stereo position of each note

changes.

■ Volume: Use this parameter to set the volume of

the selected part. This parameter duplicates the slid-

ers on the Global page.

[Back≈to≈Global] Press this field to return to the

Global page (the one with the on-screen slid-

ers).

[Sound≈Edit] See page 59.

[Effect≈Type] Press this field if you want to edit

the effects settings themselves.

Editing the Keyboard (and song) effects processors

After setting the above parameters, you may find that even sensible Reverb/Chorus Send values for the Key-

board parts do not yield the expected result.

In that case, you should edit the Reverb and Chorus

settings, by pressing the [Effect≈Type] field.

If, after pressing the [MIXER/EFFECT] button, the

page with the faders is displayed, press the left

[Effect≈Type] field (the one with the keyboard icon).

●

Reverb for Keyboard parts

(1) Press the [Reverb] field in the upper left cor-

ner to gain access to the Reverb parameters.

The display changes to:

(2) Press the field of the effect type you wish to

use.

The options are:

[Room1], [Room2], [Room3]

These types simulate

the Reverb characteristics of a room. The higher the

number (1, 2, or 3), the “bigger” the room becomes.

[Hall1], [Hall2] These types simulate the Reverb of a

small (1) or large (2) concert hall and thus sound

much “bigger” than the Room types above.

[Plate] Digital simulation of a metal plate that is

sometimes used for creating Reverb effects. Works

well for percussive sounds.

[Delay] A Delay effect (no Reverb). Works a lot like an

echo effect and thus repeats the sounds.

[Pan≈Delay] This is a stereo version of the above

Delay effect. It creates repetitions that alternate

between the left and right channels.

If necessary, you can correct the Send levels

after selecting a different Reverb type.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 123 124

Commentaires sur ces manuels

Pas de commentaire

Roland PAINO DISCOVER5 Manuel d'utilisateur Page 52

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement musical Roland PAINO DISCOVER5