Roland GR-D Manuel du propriétaire Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 12
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
Setting
10
Adjust the Pickup Sensitivity
If you feel that the volume balance between the
strings is incorrect or the sound is unnaturally
distorted, check the way in which the GK pickup is
attached.
Check
Is the GK-pickup correctly installed?
After reading the instructions in the GK-pickup Owner’s
Manual, check the installation once more.
On the Roland website, the “How to install the GK pickup
page provides an explanation and photos on how to attach
a GK pickup. Be sure to take a look!
http://www.roland.com/GK/
If this does not solve the problem, you can adjust the
pickup sensitivity as described below.
* Normally, you should use the factory settings.
1. While holding down the [SELECT]
button, turn on the power (insert a plug
into the OUTPUT L jack).
The unit will be in pickup sensitivity adjustment mode.
2. Press the [ON/OFF] pedal to select a
string.
Start by selecting string 1.
String Indicator
1
ON/OFF SOLO
POWER
GR-D
2
ON/OFF SOLO
POWER
GR-D
3
ON/OFF SOLO
POWER
GR-D
4
ON/OFF SOLO
POWER
GR-D
5
ON/OFF SOLO
POWER
GR-D
6
ON/OFF SOLO
POWER
GR-D
3. Play a string, and use the [TONE] knob to
adjust the Pickup Sensitivity.
Sensitivity Indicator
1 (low)
1 2 3 4
2
1 2 3 4
3
1 2 3 4
4
1 2 3 4
5
1 2 3 4
6
1 2 3 4
7
1 2 3 4
8 (high)
1 2 3 4
The MEMORY indicator shows the current
sensitivity setting.
Play string 1 at the maximum
strength you would use during
actual performance, and use the
[TONE] knob to adjust the sensitivity
so that the MANUAL indicator lights
briey at the maximum volume.
* If the sound is unnaturally distorted, lower the sensitivity.
4. In the same way, adjust the sensitivity
for the 2nd through 6th strings as well.
5. Check the volume balance of the six
strings.
Play each of the strings 6–1 at normal strength; if a string
sounds unusually loud, lower the sensitivity of that string to
minimize any discrepancy in volume between the strings.
6. Press the [WRITE] button to decide the
setting.
What is Pickup Sensitivity?
Cutaway diagram of the guitar neck
GK-pickup
If the distance between each string and the GK pickup
is dierent, the volume will also be dierent. The pickup
sensitivity adjustment allows you to compensate for this
dierence in volume.
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire