Roland PC-70 Manuel d'utilisateur télécharger pdf (Page 18)

Changing the Velocity Sensitivity: Velocity

Whenever a key is pressed on the instrument, the value for velocity will be transmitted along

with the note information. The following setting allows you to choose the sensitivity of the

response to velocity (range of possible change).

fig.VeloCurv.e

fig.velocity.e

[Procedure]

1. Set the MIDI channel to match that of the Part (sound module) to be controlled.

2. Press MIDI/SELECT [3] (LED will show “SEL”).

3. Press the F#3 black key (VELOCITY) [8].

4. Press MIDI/SELECT [3] again to confirm your selection. Move the DATA ENTRY

slider to select the minimum value, thus setting the desired range for velocity. With

the slider at its maximum, velocity values within the entire 1–127 range can be

generated.

Slider position: minimum

Strength of key touch

Velocity value

Slider position: center

Strength of key touch

Velocity value

Slider position: maximum

Strength of key touch

Velocity value

Velocity

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Pas de commentaire

Roland PC-70 Manuel d'utilisateur Page 18