Roland LEC-300A Guide d'installation télécharger pdf (Page 47)

6. Installing the Ink Cartridges (LEC-330)

Ink Mode

In the case of LEC-330, you need to select the ink mode in accordance with the ink type.

? P.47, "Selecting the Ink Mode"

 ECO-UV gloss/gloss mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.

 ECO-UV white/white mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.

 ECO-UV gloss/white mode

This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and

one white ink cartridge.

 ECO-UVS ink mode

This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.

Filling with Ink for the First Time

When installing ink cartridges for the rst time, clean the print heads with the cleaning solution,

and then ll with ink of each color. This operation requires four SOL INK cleaning cartridges.

* For SOL INK cartridges and ink cartridges, be sure to use new ones.

* Never, under any circumstances, use anything other than the specied type of ink or cleaning

uid.

* You can switch the ink type after lling with ink although there are some restrictions. See

“Switching the Ink Type” in User’s Manual for more information.

Afxing the Cartridge-slot Labels

Procedure



Open the ink cartridge cover.

Hold the knob.

Knob

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 67 68

Pas de commentaire

Roland LEC-300A Guide d'installation Page 47