Roland SJ-740 Manuel d'utilisateur télécharger pdf (Page 18)

Installing the Heater Platen, cont.

17. Tighten the Heater cables with the Insulock Ties and run the Heater cables through

to the back of the machine as shown in Fig. 12. Once the cables are put through, pull

any slack from the rear (Fig. 13).

NOTE: Prior to running the cables through, remove the Flushing Unit Plate as to not

cut your fingers and/or hand.

Fig. 12 Fig. 13

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 52 53

Pas de commentaire

Roland SJ-740 Manuel d'utilisateur Page 18