Roland RD-700NX Manuel d'utilisateur télécharger pdf (Page 80)

Detailed Settings for Each Function

Formatting Memory (Format)

“Formatting” is an operation that returns the internal memory to the

factory-set condition, or prepares USB memory for use with RD-700NX.

USB memory cannot be used with the RD-700NX unless it is formatted

suitably for the RD-700NX.

If you’re using newly purchased USB memory, you must rst format it

on the RD-700NX.

NOTE

When you format the USB memory, all data previously saved on

that memory will be erased. Before you carry out a format, make

sure that the USB memory does not contain important data you

need to keep.

1. Press the [MENU] button, getting the indicator to light.

The Edit screen appears.

2. Press the Cursor [ ] [ ] buttons to select “5.File,” then

press the [ENTER] button.

The Edit screen appears.

3. Press the Cursor [ ] [ ] buttons to select “6. Format,” then

press the [ENTER] button.

The following screen appears.

4. Press the [LAYER EDIT] (MEDIA) button to select the media

that you want to format.

5. Press the [ENTER] button.

The conrmation message appears.

If you decide to cancel the Format operation, press the [EXIT/SHIFT]

button.

6. Press the [ENTER] button once again to execute the Format

operation.

All the contents of the memory will be erased.

7. Press the [MENU] button, extinguishing its indicator.

You’ll be returned to the Live Set screen or the One Touch screen.

NOTE

• Never turn o the power while the screen indicates “Executing...”

• Don’t disconnect the USB memory until formatting is completed.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 105 106

Pas de commentaire

Roland RD-700NX Manuel d'utilisateur Page 80